- Ifeffit - millenia.cars.aps.anl.gov

Re: [Ifeffit] Self absorption Correction
by Richard Mayes 04 May '15

04 May '15

Farzana, I'm copying the IFEFFIT mail list, they may have the information buried in the archives somewhere. That link points to Grant Bunker's webpage containing his XAFS tutorials and it will not open for me at the moment either. However, there are several very good books that have come out lately on XAFS that explain self absorption quite well. If you're not interested in getting a copy of the books, there is a discussion thread from when I was a newbie to overabsorption that is found on the XAFS.org tutorials page. I suggest going through it as several contributed substantial knowledge in that thread (http://www.xafs.org/Experiment/OverAbsorption) Cheers, -Rich On Mon, May 4, 2015 at 7:47 PM, Farzana Nasreen <farzana6109(a)gmail.com> wrote: > Dear Rich, > > http://cars9.uchicago.edu/pipermail/ifeffit/2009-February/008631.html > > I was looking at this above link to find out similar information that Jen > had. Unfortunately, I couldn't open the link in the reply that you gave to > her. > Do you know where I can download this paper by > > *http://gbxafs.iit.edu/training/Self_Absorption_effects.pdf <http://gbxafs.iit.edu/training/Self_Absorption_effects.pdf>* > > I am working on some PFY-XAS data on some uranium compounds. > > Thanks > > Farzana > > > > >

1 0

Demeter Package for mac
by ebonturim＠usp.br 29 Apr '15

29 Apr '15

Hi everyone! I would like to know if the Demeter Package is already working into the mac (2015). Someone could use it? How do install the right way files? Thank you. Everton Bonturim

2 1

Re: [Ifeffit] energy resolution
by Lisa Bovenkamp 20 Apr '15

20 Apr '15

Hello all. I am getting confused with different comments how to determine the energy resolution of an XAS beamline. I think using peak fitting to determine the line width is a reasonable method. The basis of a XAS peak is the Voigt profile (a combination of a Lorenzian and Gaussian) The width of the Lorenzian equals the natural line width while the width of the Gaussian represents the experimental line width and some features Now here is question 1: What is the combination of the two profiles in the Athena peak fitting routine for the Pseudo-Voigt? Question 2: Is the sigma (Gaussian width) that delta E that represents the resolution - (E /delta E) ? Using a different program (Igor Pro) to determine the width gives different results because can only use a simple combination of Lorentz and Gauss (1:1). Thanks. Lisa

2 1

Athena reporting incorrect element on import
by Kenneth Latham 20 Apr '15

20 Apr '15

Hi, I am having a number of issues with importing my data into Athema, the data that I collected was on the carbon K edge. As there is an issue with recording carbon (as it builds up on the mirrors), the synchrotron that I performed my measurments at (Australian Synchrotron) has developed software to perform a double normalization to remove these effects. The problem comes when importing the now normalized data into Athena. As it doesn't require normalization again, I select the norm(E) data type and the correct column for energy and response which produces the correct plot of the data. When I click OK it attempts to produce the other plots, sometimes it manages to make a k-space and R-space but q-space is never displayed and other times it only manages the energy plot. Additionally, the word element is lit up red and it has selected beryllium as the element on the L2 edge. Changing this to carbon does not seem to fix the problem as it reverts back to beryllium as soon as I leave the main page. Finally, when I go to peak fitting, any value added for peaks informs me that it is out of range. I have attached some normalized data. Any help with this would be greatly appreciated. Regards, Ken Latham

4 4

Re: [Ifeffit] Problems installing demeter in Manjaro Linux
by Ramiro Moreira Toja 16 Apr '15

16 Apr '15

Bruce, force-installing with cpan did the trick, thanks! I still wonder if the apache/src thing may give me trouble some day. When installing the XMLRPC::Lite module, I hit on that again, but everything worked in the end. Thanks for your help (and for this great software, too!) Ramiro I'm not familiar with Manjaro. Are there package in its packaging system for those two perl modules? If so, just install them that way. If not, you could try running the cpan program and doing: force install Regexp::Assemble and force install XMLRPC::Lite Another option is to download those two packages from metacpan.org and install them by hand. As for the pgplot installation -- I believe I had to do the same thing the last time I built Ifeffit. Glad you figured it out! Good luck! Let us know if you run into other problems. B On 04/15/2015 09:40 PM, Ramiro Moreira Toja wrote: Hi, I'm using Manjaro 0.8.12 x64. I tried to install the demeter collection (following these instructions <https://bruceravel.github.io/demeter/pods/installation.pod.html>), but keep failing to do so. Also, I've checked to have installed all the reccomended packages, including apache and gnuplot. When installing PGPLOT, I've had to edit the configuration to use gif instead of png, because it kept failing to install. Once I did this, it went smoothly. I add this piece of information here hoping this helps to solve later problems. I'm having a little trouble installing dependencies. At the "sudo ./Build installdeps", it kept having trouble to find the apache/src. After a little Web search, it seems like I need to manually download the httpd sources, so I got them from here <http://apache.xfree.com.ar//httpd/httpd-2.4.12.tar.bz2>, but now it indicates I need Apache 1.3.0 version! If I do "perl Build.PL", I get: perl Build.PL Checking prerequisites... requires: ! Regexp::Assemble is not installed ! XMLRPC::Lite is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation So, I guess I'm having some more problems with the dependencies, apart from the Apache ones. What should be my next move to fix this? I've been even considering using a Ubuntu LiveUSB with persistence, just to get this working in a proven system, but really would like to get it working on my OS of choice. Thanks in advance Ramiro _______________________________________________ Ifeffit mailing list Ifeffit(a)millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit -- Bruce Ravel ------------------------------------ bra...(a)bnl.gov National Institute of Standards and Technology Synchrotron Science Group at NSLS-II Building 535A Upton NY, 11973 Homepage:http://bruceravel.github.io/home/ Software:https://github.com/bruceravel Demeter:http://bruceravel.github.io/demeter/ _______________________________________________ Ifeffit mailing list Ifeffit(a)millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

1 0

Problems installing demeter in Manjaro Linux
by Ramiro Moreira Toja 16 Apr '15

16 Apr '15

Hi, I'm using Manjaro 0.8.12 x64. I tried to install the demeter collection (following these instructions <https://bruceravel.github.io/demeter/pods/installation.pod.html>), but keep failing to do so. Also, I've checked to have installed all the reccomended packages, including apache and gnuplot. When installing PGPLOT, I've had to edit the configuration to use gif instead of png, because it kept failing to install. Once I did this, it went smoothly. I add this piece of information here hoping this helps to solve later problems. I'm having a little trouble installing dependencies. At the "sudo ./Build installdeps", it kept having trouble to find the apache/src. After a little Web search, it seems like I need to manually download the httpd sources, so I got them from here <http://apache.xfree.com.ar//httpd/httpd-2.4.12.tar.bz2>, but now it indicates I need Apache 1.3.0 version! If I do "perl Build.PL", I get: perl Build.PL Checking prerequisites... requires: ! Regexp::Assemble is not installed ! XMLRPC::Lite is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation So, I guess I'm having some more problems with the dependencies, apart from the Apache ones. What should be my next move to fix this? I've been even considering using a Ubuntu LiveUSB with persistence, just to get this working in a proven system, but really would like to get it working on my OS of choice. Thanks in advance Ramiro

2 1

FEFF calculation for two inequivalent absorbing sites
by Eugenio Paris 10 Apr '15

10 Apr '15

Hello everybody, I'm trying to make Co K-edge EXAFS fitting for the Co3O4 compound (*.cif file is attached). The nearest neighbour of Co is oxigen at about 1.93 Angstrom distance. Cobalt sits in two inequivalent sites in the unit cell. When I perform the FEFF calculation in Artemis for either one or the other site i get the same path with Reff = 1.93 and degeneracy = 4. So i wonder what is the correct way to take account of the presence of both sites. At the beginning i was thinking to put 2*amp as S0^2 parameter to take account for twice the coordination number. Then i tried to use the "Aggregate" option in Artemis. When I use this option i get exactly the same result, i.e. a SS path with Reff = 1.92 and degeneracy = 4... I was expecting to get twice the degeneracy.. (the margin and beta parameters are set to default) My question is: Why do i get the same path list when I do use the "Aggregate" pathfinder and when I don't? What is wrong in my interpretation? Thank you in advance! Sincerely, Eugenio

3 3

error message by import
by Zimina, Anna (IKFT) 09 Apr '15

09 Apr '15

I get the following error message when I read the txt file with two columns of data (energy and intensity): "11:42:20: Use of uninitialized value $line in pattern match (m//) at C:/strawberry/perl/site/lib/Demeter/Files.pm line 188." Still the data can be read. What is the problem? Thanks in advance, Anna Zimina. ______________________________________________________________________________________ Karlsruhe Institute of Technology (KIT) Institute of Catalysis Research and Technology (IKFT) Dr. Anna Zimina Beamline scientist Hermann-von-Helmholtz-Platz 1 Building 345, Office 108 76344 Eggenstein-Leopoldshafen Phone: +49 721 608 28673 Fax: +49 721 608 26789 E-Mail anna.zimina(a)kit.edu<mailto:anna.zimina@kit.edu> [cid:image001.jpg@01D071F1.C77B7BC0]

3 6

Atoms
by Zimina, Anna (IKFT) 08 Apr '15

08 Apr '15

In the last version Atoms is not present as a separate program. Is it correct? Mit freundlichen Grüßen, Anna Zimina ______________________________________________________________________________________ Karlsruhe Institute of Technology (KIT) Institut für Katalyseforschung und -technologie (IKFT) Dr. Anna Zimina Wissenschaftlerin Hermann-von-Helmholtz-Platz 1 Geb. 345 Zi. 108 76344 Eggenstein-Leopoldshafen Fon: +49 721 608 28673 Fax: +49 721 608 26789 E-Mail anna.zimina(a)kit.edu<mailto:anna.zimina@kit.edu> [cid:image001.jpg@01D071F0.3A2FB840]

2 1

Evaluation of uncertainty using correlated Debye model + advices for the fitting of an hexagonal Co-foil
by Samy OuldChikh 07 Apr '15

07 Apr '15

Dear all, I would like to go beyond the fitting of the first shell for a cobalt metallic foil acquired at FAME beamlime (ESRF). It's not mandatory for the determination of So in this case, but I just would like to improve myself in EXAFS fitting. The cobalt foil has an hexagonal structure (P 63/mmc, a =b=2.507 A, c= 4.068 A) according to the supplier. The first 49 scattering paths calculated with FEFF were selected to cover the R range up to 5.1 A. This include multiple scattering paths. The parametrization of those scattering paths is as follow (.apj enclosed) : - Distances : 1) a spherical expansion term was used to describe distance variation in [hkl] direction (reff*alpha1) with l considered as "large" when compared to h,k (reff*alpha1) 2) another spherical expansion term was used to describe distance variation in pure [hk0] direction (reff*alpha2) 3) a rough average of two previous expansion terms for [hkl] direction when h,k are comparable to l (reff*(alpha2+alpha1)/2). - For modeling disorder, the correlated Debye model was used with 3 parameters dt, dt2, dt3 (t =293K): 1) [hkl] direction with l considered as "large" : debye(t,dt) 2) pure [hk0] direction: debye(t,dt2) 3) for [hkl] direction with h,k comparable to l : debye(t,(dt+dt2)/2) But does this choice of parametrization is really reasonable? It seems very rough to me but when I look at the fit results it looks ok. - Uncertainty on : 1) Distances : is it simply delta(r) = reff*delta(alpha) ? 2) Debye-Waller : I can't figure out how to relate the uncertainty computed for the Debye temperatures (dt, dt2) to the uncertainties of the debye-waller terms for each scattering paths. Although I spent some times trying to understand this paper, http://journals.aps.org/prb/pdf/10.1103/PhysRevB.20.4908, I can't write a simple relation at the end. Many thanks for your kind help, Best Regards, Samy Ould-Chikh KAUST Catalysis Center Bldg.3,Level 4, #4231 4700 King Abdullah University of Science & Technology Thuwal 23955-6900 Kingdom of Saudi Arabia Tel: +966 12 8084486 E-mail: samy.ouldchikh(a)kaust.edu.sa Website: http://kcc.kaust.edu.sa/Pages/Home.aspx ________________________________ This message and its contents including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email.

2 3