September 2020 - Ifeffit - millenia.cars.aps.anl.gov

Core-hole Lifetimes in Hephaestus 0.9.26
by Daniel Przyrembel 28 Sep '20

28 Sep '20

To Whom it may concern, I am quite sure there is a general lifetime/energy-width conversion error in Hephaestus: All core-hole lifetimes seem to come out too long by a factor of - as it seems exactly - 10: E.g. the lifetime of the F K-edge with a width of 0.25 eV is given as 25.30 fs instead of ca. 2.6 fs (width = h_bar / lifetime). This glitch was present in 0.9.25 already and, as I noticed after updating, prevails in 0.9.26. I have not tried earlier versions. Best regards, Daniel

2 7

EXAFS fitting sum of all paths in R space
by Ashwini Kumar Poswal 23 Sep '20

23 Sep '20

Dear All, I have one problem regarding the sum of all paths (R-space) after fitting. If we include many paths for the fitting, the fitting shows a good fit but after fitting, I select all paths and export (using Artemis [Data] window: save data + marked paths as |χ(R)|. I plotted all paths in origin as well as the sum of all paths. But when I add up all the contributions from all the paths, the deviation at larger paths is extraordinarily high and not equal to final fit. I am attaching a figure for illustration. It is clearly seen that the final fit is lesser compared to one of the path and the sum of all paths is quite high compared to fit (as shown in second figure. Can anybody suggest, how to sum different paths? [image: image.png] [image: image.png] Regards *Ashwini Kumar Poswal* *Mumbai* *Tel.-+91 (022) 25595081*

2 2

Requesting guidance in understanding results from Athena
by Deepak Varanasi 13 Sep '20

13 Sep '20

5 7

Postdoctoral fellowship in AI - related field
by Anatoly Frenkel 12 Sep '20

12 Sep '20

Please pass this info to anyone interested in this opportunity, particularly, those students who are about to obtain their PhD and looking for postdoctoral fellowships. This one may be suitable for those who plan to use data science approaches for interpreting XANES and EXAFS data and apply them to interdisciplinary research projects. https://www.stonybrook.edu/commcms/iacs/opportunities/fellowships/Postdocto… You are welcome to contact me if you are interested. Anatoly ------------------------------------------------------------------- Anatoly I. Frenkel Professor Department of Materials Science and Chemical Engineering Stony Brook University Stony Brook, NY 11794, Ph: 631-632-2751 Email: anatoly.frenkel(a)stonybrook.edu <https://mail.bnl.gov/OWA/redir.aspx?C=F6wCGt4adziN6IvpdRQ-rWdgy3Oaoif_x-0yb…> http://you.stonybrook.edu/frenkel Joint Appointment: Chemistry Department, Brookhaven National Laboratory Upton, NY 11973. Ph: 631-344-3013. Group: 631-344-3494 Email: frenkel(a)bnl.gov https://www.bnl.gov/chemistry/bio/FrenkelAnatoly.asp Spokesperson, Synchrotron Catalysis Consortium (SCC) at BNL http://you.stonybrook.edu/scc2 -------------------------------------------------------------------

1 0

XAFS short course at BNL: Nov. 18-20, 2020
by Anatoly Frenkel 11 Sep '20

11 Sep '20

Dear mailing list subscribers: Please pass this information along to your group members or others who may be interested in this. As it has done every year since 2005, on* Nov. 18-20, 2020*, Synchrotron Catalysis Consortium (SCC) will run an annual short course on X-ray absorption fine structure techniques and applications. *Date of Event:* November 18-20, 2020 *Official Name of Event: * Short course on X-ray Absorption Fine Structure: Application to Nanomaterials *Description: * Every year Synchrotron Catalysis Consortium, in partnership with NSLS-II, organizes and runs a 3-day short course to those interested in learning about the use of x-ray absorption spectroscopy methods. This year, the course will be offered online from November 18–20, 2020. The course will be useful for those scientists' who already possess basic experience with XANES and EXAFS methods, including experiment and data analysis, and are interested in advanced analysis and modeling methods applicable for nanomaterials research. The course will be run in a flip classroom mode. Participants will study video-presentations of leading experts in XAFS methods and applications in advance of the workshop. The video-lectures will be assembled to follow the workshop agenda. During the workshop, the instructors will divide participants in breakout sections for in-depth problem solving, data analysis and modeling, to best match participants and their research interests. There will be Q&A sessions on the subject of the lectures, and in depth practicums of the EXAFS and XANES analysis software programs. The course will be open to 80 participants, selected based on their application materials. Further info about the course, including the application materials and the deadlines, is available here: https://www.bnl.gov/xafs2020/ Note the application deadline: September 27, 2020. For past XAFS workshops, and information about the SCC-supported beamlines and capabilities, please visit the SCC web sites: https://you.stonybrook.edu/scc2/xafs-workshops/ For any questions, please contact me. Best regards, Anatoly ------------------------------------------------------------------- Anatoly I. Frenkel Professor Department of Materials Science and Chemical Engineering Stony Brook University Stony Brook, NY 11794, Ph: 631-632-2751 Email: anatoly.frenkel(a)stonybrook.edu <https://mail.bnl.gov/OWA/redir.aspx?C=F6wCGt4adziN6IvpdRQ-rWdgy3Oaoif_x-0yb…> http://you.stonybrook.edu/frenkel Joint Appointment: Chemistry Department, Brookhaven National Laboratory Upton, NY 11973. Ph: 631-344-3013. Group: 631-344-3494 Email: frenkel(a)bnl.gov https://www.bnl.gov/chemistry/bio/FrenkelAnatoly.asp Spokesperson, Synchrotron Catalysis Consortium (SCC) at BNL http://you.stonybrook.edu/scc2 -------------------------------------------------------------------

1 0

Unable to Import Data In Athena
by Angshuman Gupta 04 Sep '20

04 Sep '20

Dear sir, I am new to this mailing list and excuse me if the question had already been asked. I am not able to import data in the Athena software. I tried to import some of the examples data like Fe_lepidocrocite.000 in the Fe standards folder while importing the data I encountered an error (screenshot has been attached along with the log file generated in the terminal). I am using Linux Mint 18.3 Sylvia OS and perl 5, version 22, subversion 1 (v5.22.1). I followed the instruction for installation here " https://bruceravel.github.io/demeter/documents/SinglePage/demeter_nonroot.h… " I will be thankful if you could suggest something to getting rid of this issue. Thank you Angshuman Gupta PhD scholar IIT Bombay

4 6