[Ifeffit] EXAFS data
Barton, David (DG)
DGBarton at dow.com
Wed Jan 28 09:39:41 CST 2009
Abhijeet,
Check out this link to a similar past discussion on the mailing list
regarding reading data from the Farrel Lytle database, it may be helpful
as well.
http://cars9.uchicago.edu/pipermail/ifeffit/2005-November/002129.html
Dave
-----Original Message-----
From: ifeffit-bounces at millenia.cars.aps.anl.gov
[mailto:ifeffit-bounces at millenia.cars.aps.anl.gov] On Behalf Of Carlo
Segre
Sent: Wednesday, January 28, 2009 9:13 AM
To: XAFS Analysis using Ifeffit
Subject: Re: [Ifeffit] EXAFS data
Hi Abhijeet:
The Farrel Lytle data is in the form of staps with calibration points.
You need to make a conversion to energy. Grant Bunker sent me this
description a while ago. I have written a Python program to do the
conversion but have had no time to finish it off and make it really
useful.
Hope this helps
carlo
--------------------------------------------------------------
>From bunker at iit.edu Wed Aug 6 12:27:28 2008
Date: Wed, 6 Aug 2008 12:27:13 -0500
From: grant bunker <bunker at iit.edu>
To: segre at agni.phys.iit.edu
Subject: Re: Lytle database
I wrote a little conversion program in mathematica for somebody who
asked a year or so ago. It should be easy to pythonize it. The main
thing to remember is the first column is in motor steps (!), and the
angle is a linear function of motor steps, and the rest is just
Bragg's law. Things are referenced physically to the copper edge.
Key parameters used in the data acquisition program are in the header:
dspace is obvious, stepdeg is steps per degree in the mono, cuedge is
the position of the Cu edge as measured in motor step units.
So, the business end of the conversion is something like this:
(*constants*)
hc=12398.5;
Cuenrg=8980.3;
(* these things should be extracted from file header *)
dspace=3.13562;
cuedge=50880.;
stpdeg=4000.;
(* code*)
const=hc/(2*dspace);
thetaCu=ArcSin[const/Cuenrg];
theta[n_]:=(n-cuedge)/stpdeg*pi/180.+thetaCu
e[n_]:=const/Sin[theta[n]]
I'm not positive, but I think the channel offsets are already
subtracted from the other columns; the offsets are just listed for
documentation.
----------------------------------------------------------
On Wed, 28 Jan 2009, abhijeet gaur wrote:
> Hi
> We have Farell Lytle type data. When we put that into ATHENA we
get the
> Energy curve. But we are not able to extract that Energy converted
data from
> ATHENA . We tried to import the data in ORIGIN but we could not do so
though
> the graph was imported.So if there is any way to extract the data
please let
> us know.
>
> Thanks
>
> Abhijeet
>
--
Carlo U. Segre -- Professor of Physics
Associate Dean for Special Projects, Graduate College
Illinois Institute of Technology
Voice: 312.567.3498 Fax: 312.567.3494
segre at iit.edu http://www.iit.edu/~segre segre at debian.org
_______________________________________________
Ifeffit mailing list
Ifeffit at millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
More information about the Ifeffit
mailing list