PV: Epics Process Variables¶

The pv module provides a higher-level class pv.PV, which creates a PV object for an EPICS Process Variable. A PV object has both methods and attributes for accessing it’s properties.

The `PV` class¶

class pv.PV(pvname[, callback=None[, form='time'[, verbose=False[, auto_monitor=None[, count=None[, connection_callback=None[, connection_timeout=None[, access_callback=None]]]]]]]])¶

create a PV object for a named Epics Process Variable.

Parameters

pvname – name of Epics Process Variable
callback (callable, tuple, list or None) – user-defined callback function on changes to PV value or state.
form (string, one of ('native','ctrl', or 'time')) – which epics data type to use: the ‘native’, ‘time’, or the ‘ctrl’ (Control) variant.
verbose (True/False) – whether to print out debugging messages
auto_monitor (None, True, False, or bitmask (see Automatic Monitoring of a PV)) – whether to automatically monitor the PV for changes.
count (int) – number of data elements to return by default (see here)
connection_callback (callable or None) – user-defined function called on changes to PV connection status.
connection_timeout (float or None) – time (in seconds) to wait for connection before giving up
access_callback (callable or None) – user-defined function called on changes to PV access rights

Once created, a PV should (barring any network issues) automatically connect and be ready to use.

>>> from epics import PV
>>> p = PV('XX:m1.VAL')
>>> print p.get()
>>> print p.count, p.type

The pvname is required, and is the name of an existing Process Variable.

The callback parameter specifies one or more python methods to be called on changes, as discussed in more detail at User-supplied Callback functions

The connection_callback parameter specifies a python method to be called on changes to the connection status of the PV (that is, when it connects or disconnects). This is discussed in more detail at User-supplied Connection Callback functions

The form parameter specifies which of the three variants ‘native’, ‘ctrl’ (Control) or ‘time’ (the default) to use for the PV. The ‘native’ form returns just the value, the ‘time’ form includes the timestamp from the server the PV lives on, as well as status information. The control form includes several additional fields such as limits to the PV, which can be useful in some cases. Also note that the additional ‘ctrl’ value fields (see the Table of Control Attributes) can be obtained with get_ctrlvars() even for PVs of ‘native’ or ‘time’ form.

The auto_monitor parameter specifies whether the PV should be automatically monitored. See Automatic Monitoring of a PV for a detailed description of this.

The verbose parameter specifies more verbose output on changes, and is intended for debugging purposes.

The access_callback parameter specifies a python method to be called on changes to the access rights of the PV (read/write access changes). This is discussed in more detail here.

methods¶

A PV has several methods for getting and setting its value and defining callbacks to be executed when the PV changes.

pv.get([count=None[, as_string=False[, as_numpy=True[, timeout=None[, use_monitor=True[, with_ctrlvars=False]]]]]])¶

get and return the current value of the PV

Parameters

count (integer or None) – maximum number of array elements to return
as_string (True/False) – whether to return the string representation of the value.
as_numpy – whether to try to return a numpy array where appropriate.
timeout (float or None) – maximum time to wait for data before returning None.
use_monitor (True/False) – whether to rely on monitor callbacks or explicitly get value now.

see String representation for a PV for details on how the string representation is determined.

With the as_numpy option, an array PV (that is, a PV whose value has more than one element) will be returned as a numpy array, provided the numpy module is available. See Strategies for working with large arrays for a discussion of strategies for how to best deal with very large arrays.

The use_monitor option controls whether the most recent value from the automatic monitoring will be used or whether the value will be explicitly asked for right now. Usually, you can rely on a PVs value being kept up to date, and so the default here is True. But, since network traffic is not instantaneous and hard to predict, the value returned with use_monitor=True may be out-of-date.

The timeout sets how long (in seconds) to wait for the value to be sent. This only applies with use_monitor=False, or if the PV is not automatically monitored. Otherwise, the most recently received value will be sent immediately.

The with_ctrlvars option requests DBR_CTRL data, including control limits, precision, and so on, in addition to the value normally returned. This metadata will be available by accessing various attributes such as lower_ctrl_limit.

See Automatic Monitoring of a PV for more on monitoring PVs and The wait and timeout options for get(), ca.get_complete() for more details on what happens when a pv.get() times out.

pv.get_with_metadata([form=None[, count=None[, as_string=False[, as_numpy=True[, timeout=None[, use_monitor=True[, with_ctrlvars=False]]]]]]])¶

Returns a dictionary of the current value and associated metadata

Parameters

form ({'native', 'time', 'ctrl', None}) – EPICS data type to request: the ‘native’, or the ‘ctrl’ (Control) or ‘time’ variant. Defaults to the PV instance attribute form.
count (integer or None) – maximum number of array elements to return
as_string (True/False) – whether to return the string representation of the value.
as_numpy – whether to try to return a numpy array where appropriate.
timeout (float or None) – maximum time to wait for data before returning None.
use_monitor (True/False) – whether to rely on monitor callbacks or explicitly get value now.

See PV.get, above, for further notes on each of these parameters.

Each request to EPICS can optionally contain additional metadata associated with the value. While PV.get updates the PV instance with any metadata, get_with_metadata will return the requested metadata and value in a dictionary.

The exception is when the PV is set to auto-monitor and the use_monitor parameter here is set. This means that both the value and metadata will used the cached values instead of making a new request. Because of this, the metadata and value returned here will be a full dictionary of all known metadata for the PV instance.

pv.put(value[, wait=False[, timeout=30.0[, use_complete=False[, callback=None[, callback_data=None]]]]])¶

set the PV value, optionally waiting to return until processing has completed, or setting the put_complete to indicate complete-ness.

Parameters

value – value to set PV
wait (True/False) – whether to wait for processing to complete (or time-out) before returning.
timeout (float) – maximum time to wait for processing to complete before returning anyway.
use_complete (True/False) – whether to use a built-in callback to set put_complete.
callback (None or a valid python function) – user-supplied function to run when processing has completed.
callback_data – extra data to pass on to a user-supplied callback function.

The wait and callback arguments, as well as the ‘use_complete’ / put_complete attribute give a few options for knowing that a put() has completed. See Put with wait, put callbacks, and put_complete for more details.

pv.get_ctrlvars()¶: returns a dictionary of the control values for the PV. This dictionary may have many members, depending on the data type of PV. See the Table of Control Attributes for details.

pv.get_timevars()¶: returns a dictionary of the time values for the PV, which include status, severity, and the timestamp from the CA server.

pv.poll([evt=1.e-4[, iot=1.0]])¶

poll for changes. This simply calls epics.ca.poll()

Parameters

evt (float) – time to pass to epics.ca.pend_event()
iot (float) – time to pass to epics.ca.pend_io()

pv.connect([timeout=None])¶

this explicitly connects a PV, and returns whether or not it has successfully connected. It is probably not that useful, as connection should happen automatically. See wait_for_connection().

Parameters: timeout (float) – maximum connection time, passed to epics.ca.connect_channel()
Return type: True/False

if timeout is None, the PVs connection_timeout parameter will be used. If that is also None, episc.ca.DEFAULT_CONNECTION_TIMEOUT will be used.

pv.wait_for_connection([timeout=None])¶

this waits until a PV is connected, or has timed-out waiting for a connection. Returns whether the connection has occurred.

Parameters: timeout (float) – maximum connection time.
Return type: True/False

if timeout is None, the PVs connection_timeout parameter will be used. If that is also None, epics.ca.DEFAULT_CONNECTION_TIMEOUT will be used.

pv.disconnect()¶: disconnect a PV, clearing all callbacks.

pv.reconnect()¶: reconnect (or try to) a disconnected PV.

pv.clear_auto_monitor()¶: turn off automatic monitoring of a PV. Note that this will suspend all event callbacks on a PV at the CA level by calling epics.ca.clear_subscription(), but will not clear the list of PVs callbacks. This means that doing reconnect() will resume event processing including any callbacks or the PV.

pv.add_callback(callback=None[, index=None [, with_ctrlvars=True[, **kw]])¶

adds a user-defined callback routine to be run on each change event for this PV. Returns the integer index for the callback.

Parameters

callback (None or callable) – user-supplied function to run when PV changes.
index (None (integer will be produced) or immutable) – identifying key for this callback
with_ctrlvars – whether to (try to) make sure that accurate control values will be sent to the callback.
kw – additional keyword/value arguments to pass to each execution of the callback.

Return type

integer

Note that multiple callbacks can be defined, each having its own index (a dictionary key, typically an integer). When a PV changes, all the defined callbacks will be executed. They will be called in order (by sorting the keys of the callbacks dictionary)

See also: callbacks attribute, User-supplied Callback functions

pv.remove_callback(index=None)¶

remove a user-defined callback routine using supplied

Parameters: index (None or integer) – index of user-supplied function, as returned by add_callback(), and also to key for this callback in the callbacks dictionary.
Return type: integer

If only one callback is defined an index=``None``, this will clear the only defined callback.

See also: callbacks attribute, User-supplied Callback functions

pv.clear_callbacks()¶: remove all user-defined callback routine.

pv.run_callbacks()¶

execute all user-defined callbacks right now, even if the PV has not changed. Useful for debugging!

See also: callbacks attribute, User-supplied Callback functions

pv.run_callback(index)¶

execute a particular user-defined callback right now, even if the PV has not changed. Useful for debugging!

See also: callbacks attribute, User-supplied Callback functions

pv.force_read_access_rights()¶: force a read of the access rights for a PV. Normally, a PV will have access rights determined automatically and subscribe to changes in access rights. But sometimes (especially 64-bit Windows), the automatically reported values are wrong. This methods will explicitly read the access rights.

attributes¶

A PV object has many attributes, each associated with some property of the underlying PV: its value, host, count, and so on. For properties that can change, the PV attribute will hold the latest value for the corresponding property, Most attributes are read-only, and cannot be assigned to. The exception to this rule is the value attribute.

pv.value¶

The current value of the PV.

Note: The value attribute can be assigned to. When read, the latest value will be returned, even if that means a get() needs to be called.

Assigning to value is equivalent to setting the value with the put() method.

>>> from epics import PV
>>> p1 = PV('xxx.VAL')
>>> print p1.value
1.00
>>> p1.value = 2.00

pv.char_value¶: The string representation of the string, as described in get().

pv.status¶: The PV status, which will be 0 for a normal, connected PV.

pv.type¶: string describing data type of PV, such as double, float, enum, string, int, long, char, or one of the ctrl or time variants of these, which will be named ctrl_double, time_enum, and so on. See the Table of DBR Types

pv.ftype¶: The integer value (from the underlying C library) indicating the PV data type according to Table of DBR Types

pv.host¶: string of host machine provide this PV.

pv.count¶: number of data elements in a PV. 1 except for waveform PVs, where it gives the number of elements in the waveform. For recent versions of Epics Base (3.14.11 and later?), this gives the .NORD field, which gives the number of elements last put into the PV and which may be less than the maximum number allowed (see nelm below).

pv.nelm¶: number of data elements in a PV. 1 except for waveform PVs where it gives the maximum number of elements in the waveform. For recent versions of Epics Base (3.14.11 and later?), this gives the .NELM parameter. See also the count attribute above.

pv.read_access¶: Boolean (True/False) for whether PV is readable

pv.write_access¶: Boolean (True/False) for whether PV is writable

pv.access¶: string describing read/write access. One of ‘read/write’,’read-only’,’write-only’, ‘no access’.

pv.severity¶: severity value of PV. Usually 0 for PVs that are not in an alarm condition.

pv.timestamp¶: floating point timestamp (relative to the POSIX time origin, not the EPICS time origin) of the last event seen for this PV. Note that this is will contain the timestamp from the Epics server if the PV object was created with the form='time' option. Otherwise, the timestamp will be set to time according to the client, indicating when the data arrive from the server.

pv.posixseconds¶: Integer number of seconds (relative to the POSIX time origin, not the EPICS time origin) of the last event seen for this PV. This will be set only if the PV object was created with the form='time' option, and will reflect the timestamp from the server. Otherwise, this value will be 0 which can be used to signal that the timestamp attribute is from the client.

pv.nanoseconds¶: Integer number of nanoseconds for the last event seen for this PV. This will be set only if the PV object was created with the form='time' option, and will give higher time resolution than the timestamp attribute.

pv.precision¶: number of decimal places of precision to use for float and double PVs

pv.units¶: string of engineering units for PV

pv.enum_strs¶: a list of strings for the enumeration states of this PV (for enum PVs)

pv.info¶: a string paragraph (ie, including newlines) showing much of the information about the PV.

pv.upper_disp_limit¶

pv.lower_disp_limit¶

pv.upper_alarm_limit¶

pv.lower_alarm_limit¶

pv.lower_warning_limit¶

pv.upper_warning_limit¶

pv.upper_ctrl_limit¶

pv.lower_ctrl_limit¶: These are all the various kinds of limits for a PV.

pv.put_complete¶: a Boolean (True/False) value for whether the most recent put() has completed.

pv.callbacks¶

a dictionary of currently defined callbacks, to be run on changes to the PV. This dictionary has integer keys (generally in increasing order of when they were defined) which sets which order for executing the callbacks. The values of this dictionary are tuples of (callback, keyword_arguments).

Note: The callbacks attribute can be assigned to or: manipulated directly. This is not recommended. Use the methods add_callback(), remove_callback(), and clear_callbacks() instead of altering this dictionary directly.

pv.connection_callbacks¶: a simple list of connection callbacks: functions to be run when the connection status of the PV changes. See User-supplied Connection Callback functions for more details.

pv.access_callbacks¶: an list of access callbacks: functions to be run when the access rights of the PV changes. See User-supplied Access Rights Callback functions for more details.

String representation for a PV¶

The string representation for a PV, as returned either with the as_string argument to epics.ca.get() or from the char_value attribute (they are equivalent) needs some further explanation.

The value of the string representation (hereafter, the char_value), will depend on the native type and count of a PV. Table of String Representations

Table of String Representations: How raw data value is mapped to char_value for different native data types.

data types

count

char_value

string

1

= value

char

1

= value

short

1

= str(value)

long

1

= str(value)

enum

1

= enum_str[value]

double

1

= (“%%.%if” % (precision)) % value

float

1

= (“%%.%if” % (precision)) % value

char

> 1

= long string from bytes in array

all others

> 1

= <array size=*count*, type=*type*>

For double/float values with large exponents, the formatting will be (“%%.%ig” % (precision)) % value. For character waveforms (char data with count > 1), the char_value will be set according to:

>>> firstnull  = val.index(0)
>>> if firstnull == -1: firstnull= len(val)
>>> char_value = ''.join([chr(i) for i in val[:firstnull]).rstrip()

Automatic Monitoring of a PV¶

When creating a PV, the auto_monitor parameter specifies whether the PV should be automatically monitored or not. Automatic monitoring means that an internal callback will be registered for changes. Any callbacks defined by the user will be called by this internal callback when changes occur.

For most scalar-value PVs, this automatic monitoring is desirable, as the PV will see all changes (and run callbacks) without any additional interaction from the user. The PV’s value will always be up-to-date and no unnecessary network traffic is needed.

Possible values for auto_monitor are:

False

For some PVs, especially those that change much more rapidly than you care about or those that contain large arrays as values, auto_monitoring can add network traffic that you don’t need. For these, you may wish to create your PVs with auto_monitor=False. When you do this, you will need to make calls to get() to explicitly get the latest value.

None

The default value for auto_monitor is None, and is set to True if the element count for the PV is smaller than epics.ca.AUTOMONITOR_MAXLENGTH (default of 65536). To suppress monitoring of PVs with fewer array values, you will have to explicitly turn auto_monitor to False. For waveform arrays with more elements, automatic monitoring will not be done unless you explicitly set auto_monitor=True, or to an explicit mask. See Strategies for working with large arrays for more details.

True

When auto_monitor is set to True, the value will be monitored using the default subscription mask set at epics.ca.DEFAULT_SUBSCRIPTION_MASK.

This mask determines which kinds of changes cause the PV to update. By default, the subscription updates when the PV value changes by more than the monitor deadband, or when the PV alarm status changes. This behavior is the same as the default in EPICS’ camonitor tool.

Mask

It is also possible to request an explicit type of CA subscription by setting auto_monitor to a numeric subscription mask made up of dbr.DBE_ALARM, dbr.DBE_LOG and/or dbr.DBE_VALUE. This mask will be passed directly to epics.ca.create_subscription() An example would be:

pv1 = PV('AAA', auto_monitor=dbr.DBE_VALUE)
pv2 = PV('BBB', auto_monitor=dbr.DBE_VALUE|dbr.DBE_ALARM)
pv3 = PV('CCC', auto_monitor=dbr.DBE_VALUE|dbr.DBE_ALARM|dbr.DBE_LOG)

which will generate callbacks for pv1 only when the value of ‘AAA’ changes, while pv2 will receive callbacks if the value or alarm state of ‘BBB’ changes, and pv3 will receive callbacks for all changes to ‘CCC’. Note that these dbr.DBE_**** constants are ORed together as a bitmask.

User-supplied Callback functions¶

This section describes user-defined functions that are called when the value of a PV changes. These callback functions are useful as they allow you to be notified of changes without having to continually ask for a PVs current value. Much of this information is similar to that in User-supplied Callback functions for the ca module, though there are some important enhancements to callbacks on PV objects.

You can define more than one callback function per PV to be run on value changes. These functions can be specified when creating a PV, with the callback argument which can take either a single callback function or a list or tuple of callback functions. After a PV has been created, you can add callback functions with add_callback(), remove them with remove_callback(), and explicitly run them with run_callback(). Each callback has an internal unique index (a small integer number) that can be used for specifying which one to add, remove, and run.

When defining a callback function to be run on changes to a PV, it is important to know two things:

how your function will be called.

what is permissible to do inside your callback function.

Callback functions will be called with several keyword arguments. You should be prepared to have them passed to your function, and should always include **kw to catch all arguments. Your callback will be sent the following keyword parameters:

pvname: the name of the pv

value: the latest value

char_value: string representation of value

count: the number of data elements

ftype: the numerical CA type indicating the data type

type: the python type for the data

status: the status of the PV (0 for OK)

precision: number of decimal places of precision for floating point values

units: string for PV units

severity: PV severity

timestamp: timestamp from CA server.

read_access: read access (True/False)

write_access: write access (True/False)

access: string description of read- and write-access

host: host machine and CA port serving PV

enum_strs: the list of enumeration strings

upper_disp_limit: upper display limit

lower_disp_limit: lower display limit

upper_alarm_limit: upper alarm limit

lower_alarm_limit: lower alarm limit

upper_warning_limit: upper warning limit

lower_warning_limit: lower warning limit

upper_ctrl_limit: upper control limit

lower_ctrl_limit: lower control limit

chid: integer channel ID

cb_info: (index, self) tuple containing callback ID
and the PV object

Some of these may not be directly applicable to all PV data types, and some values may be None if the control parameters have not yet been fetched with get_ctrlvars().

It is important to keep in mind that the callback function will be run inside a CA function, and cannot reliably make any other CA calls. It is helpful to think “this all happens inside of a pend_event() call”, and in an epics thread that may or may not be the main thread of your program. It is advisable to keep the callback functions short and not resource-intensive. Consider strategies which use the callback only to record that a change has occurred and then act on that change later – perhaps in a separate thread, perhaps after pend_event() has completed.

The cb_info parameter supplied to the callback needs special attention, as it is the only non-Epics information passed. The cb_info parameter will be a tuple containing (index, self) where index is the key for the callbacks dictionary for the PV and self is PV object. A principle use of this tuple is to remove the current callback if an error happens, as for example in GUI code if the widget that the callback is meant to update disappears.

User-supplied Connection Callback functions¶

A connection callback is a user-defined function that is called when the connection status of a PV changes – that is, when a PV initially connects, disconnects or reconnects due to the process serving the PV going away, or loss of network connection. A connection callback can be specified when a PV is created, or can be added by appending to the connection_callbacks list. If there is more than one connection callback defined, they will all be run when the connection state changes.

A connection callback should be prepared to receive the following keyword arguments:

pvname: the name of the pv

conn: the connection status

where conn will be either True` or ``False, specifying whether the PV is now connected. A simple example is given below.

User-supplied Access Rights Callback functions¶

An access rights callback is a user-defined function that is called when the access rights - read/write permissions - of a PV undergo changes. The callback will be invoked upon successful initialization and at all events that change a PV’s access rights, including disconnection and reconnection events. An access rights callback can be specified when a PV is created, or can be added by appending to the access_callbacks list of the PV object. If there are multiple access rights callbacks defined for a PV, they will all be run on access rights events.

Put with wait, put callbacks, and put_complete¶

Some EPICS records take a significant amount of time to fully process, and sometimes you want to wait until the processing completes before going on. There are a few ways to accomplish this. First, one can simply wait until the processing is done:

import epics
p = epics.PV('XXX')
p.put(1.0, wait=True)
print 'Done'

This will hang until the processing of the PV completes (motor moving, etc) before printing ‘Done’. You can also specify a maximum time to wait – a timeout (in seconds):

p.put(1.0, wait=True, timeout=30)

which will wait up to 30 seconds. For the pedantic, this timeout should not be used as an accurate clock – the actual wait time may be slightly longer.

A second method is to use the ‘use_complete’ option and watch for the put_complete attribute to become True after a put(). This is somewhat more flexible than using wait=True as above, because you can more carefully control how often you look for a put() to complete, and what to do in the interim. A simple example would be:

p.put(1.0, use_complete=True)
waiting = True
while waiting:
    time.sleep(0.001)
    waiting = not p.put_complete

An additional advantage of this approach is that you can easily wait for multiple PVs to complete with python’s built-in all function, as with:

pvgroup = (epics.PV('XXX'), epics.PV('YYY'), epics.PV('ZZZ'))
newvals = (1.0, 2.0,  3.0)
for pv, val in zip(pvgroup, newvals):
    pv.put(val, use_complete=True)

waiting = True
while waiting:
    time.sleep(0.001)
    waiting = not all([pv.put_complete for pv in pvgroup])
print 'All puts are done!'

For maximum flexibility, one can all define a put callback, a function to be run when the put() has completed. This function requires a pvname keyword argument, but will receive no others, unless you pass in data with the callback_data argument (which should be dict-like) to put(). A simple example would be:

pv = epics.PV('XXX')
def onPutComplete(pvname=None, **kws):
    print 'Put done for %s' % pvname

pv.put(1.0, callback=onPutComplete)

The `get_pv()` function and `_PVcache_` cache of PVs¶

As mentioned in the previous chapter, a cache of PVs is maintained for each process using pyepics. When using epics.caget(), epics.caput() and so forth, or when creating a PV directly, the corresponding PV is kept in a global cache, held in pv._PVcache_.

The function get_pv() will retrieve the named PV from this cache, or create a new PV if one is not found. In long-running or complex processes, it is not unusual to access a particular PV many times, perhaps calling a function that creates a PV but only keeping that PV object for the life of the function. Using get_pv() instead of creating a PV can improve performance (the PV is already connected) and is highly recommended.

pv.get_pv(pvname[, form='time'[, connect=False[, timeout=5[, context=None[, **kws]]]]])¶

retrieves a PV from _PVcache or creates and returns a new PV.

Parameters

pvname – name of Epics Process Variable
form (string, one of ('native','ctrl', or 'time')) – which epics data type to use: the ‘native’ , or the ‘ctrl’ (Control) or ‘time’ variant.
connect (True/False) – whether to wait for the PV to connect.
timeout (float or None) – maximum time to wait (in seconds) for value before returning None.
context (integer or None (default)) – integer threading context.

Additional keywords are passed directly to PV.

pv._PVcache_¶: A cache of PV objects for the process.

Examples¶

Some simple examples using PVs follow.

Basic Use¶

The simplest approach is to simply create a PV and use its value attribute:

>>> from epics import PV
>>> p1 = PV('xxx.VAL')
>>> print p1.value
1.00
>>> p1.value = 2.00

The print p1.value line automatically fetches the current PV value. The p1.value = 2.00 line does a put() to set the value, causing any necessary processing over the network.

The above example is equivalent to

>>> from epics import PV
>>> p1 = PV('xxx.VAL')
>>> print p1.get()
1.00
>>> p1.put(value = 2.00)

To get a string representation of the value, you can use either

>>> print p1.get(as_string=True)
'1.000'

or, equivalently

>>> print p1.char_value
'1.000'

Requests including Metadata¶

It is also possible to get the metadata associated with a single Channel Access request using get_with_metadata():

>>> from epics import PV
>>> p1 = PV('xxx.VAL', form='time')

>>> print(p1.get())
1.00

>>> p1.get_with_metadata()
{'status': 0,
 'severity': 0,
 'timestamp': 1543429156.811018,
 'posixseconds': 1543429156.0,
 'nanoseconds': 811018603,
 'value': 1.0}

>>> print(p1.get_with_metadata(form='ctrl'))
{'upper_disp_limit': 100.0,
 'lower_disp_limit': -100.0,
 'upper_alarm_limit': 0.0,
 'upper_warning_limit': 0.0,
 'lower_warning_limit': 0.0,
 'lower_alarm_limit': 0.0,
 'upper_ctrl_limit': 100.0,
 'lower_ctrl_limit': -100.0,
 'precision': 3,
 'units': 'deg',
 'status': 0,
 'severity': 0,
 'value': 1.0}

Example of using info and more properties examples¶

A PV has many attributes. This can be seen from its info paragraph:

>>> import epics
>>> p = epics.PV('13IDA:m3')
>>> print p.info
== 13IDA:m3  (native_double) ==
   value      = 0.2
   char_value = '0.200'
   count      = 1
   type       = double
   units      = mm
   precision  = 3
   host       = ioc13ida.cars.aps.anl.gov:5064
   access     = read/write
   status     = 0
   severity   = 0
   timestamp  = 1274809682.967 (2010-05-25 12:48:02.967364)
   upper_ctrl_limit    = 5.49393415451
   lower_ctrl_limit    = -14.5060658455
   upper_disp_limit    = 5.49393415451
   lower_disp_limit    = -14.5060658455
   upper_alarm_limit   = 0.0
   lower_alarm_limit   = 0.0
   upper_warning_limit = 0.0
   lower_warning_limit = 0.0
   PV is internally monitored, with 0 user-defined callbacks:
=============================

The individual attributes can also be accessed as below. Many of these (the control attributes, see Table of Control Attributes) will not be filled in until either the info attribute is accessed or until get_ctrlvars() is called.

>>>  print p.type
double
>>> print p.units, p.precision, p.lower_disp_limit
mm 3 -14.5060658455

Getting a string value¶

It is not uncommon to want a string representation of a PVs value, for example to show in a display window or to write to some report. For string PVs and integer PVs, this is a simple task. For floating point values, there is ambiguity how many significant digits to show. EPICS PVs all have a precision field. which sets how many digits after the decimal place should be described. In addition, for ENUM PVs, it would be desire able to get at the name of the ENUM state, not just its integer value.

To get the string representation of a PVs value, use either the char_value attribute or the as_string=True argument to get()

Example of `put()`¶

To put a new value to a variable, either of these two approaches can be used:

>>> import epics
>>> p = epics.PV('XXX')
>>> p.put(1.0)

Or (equivalently):

>>> import epics
>>> p = epics.PV('XXX')
>>> p.value = 1.0

The value attribute is the only attribute that can be set.

Example of simple callback¶

It is often useful to get a notification of when a PV changes. In general, it would be inconvenient (and possibly inefficient) to have to continually ask if a PVs value has changed. Instead, it is better to set a callback function: a function to be run when the value has changed.

A simple example of this would be:

import epics
import time
def onChanges(pvname=None, value=None, char_value=None, **kw):
    print 'PV Changed! ', pvname, char_value, time.ctime()


mypv = epics.PV(pvname)
mypv.add_callback(onChanges)

print 'Now wait for changes'

t0 = time.time()
while time.time() - t0 < 60.0:
    time.sleep(1.e-3)
print 'Done.'

This first defines a callback function called onChanges() and then simply waits for changes to happen. Note that the callback function should take keyword arguments, and generally use **kw to catch all arguments. See User-supplied Callback functions for more details.

Example of connection callback¶

A connection callback:

#
# example of using a connection callback that will be called
# for any change in connection status

import epics
import time
import sys
from  pvnames import motor1

write = sys.stdout.write
def onConnectionChange(pvname=None, conn= None, **kws):
    write('PV connection status changed: %s %s\n' % (pvname,  repr(conn)))
    sys.stdout.flush()

def onValueChange(pvname=None, value=None, host=None, **kws):
    write('PV value changed: %s (%s)  %s\n' % ( pvname, host, repr(value)))
    sys.stdout.flush()
mypv = epics.PV(motor1, 
                connection_callback= onConnectionChange,
                callback= onValueChange)

mypv.get()

write('Now waiting, watching values and connection changes:\n')
t0 = time.time()
while time.time()-t0 < 300:
    time.sleep(0.01)

Example of an access rights callback¶

Associating an access rights callback with a PV:

import epics
import time

def access_rights_callback(read_access, write_access, pv=None):
    print "%s - read=%s, write=%s" % (pv.pvname, read_access, write_access)

# should immediately see the message upon connection
apv = epics.PV('pvname', access_callback=access_rights_callback)

try:
    start = time.time()
    while (time.time() - start) < 30:
        time.sleep(0.25)
except KeyboardInterrupt:
    pass

Table of Contents

Previous topic

Next topic

This Page

PV: Epics Process Variables¶

The `PV` class¶

methods¶

attributes¶

String representation for a PV¶

Automatic Monitoring of a PV¶

User-supplied Callback functions¶

User-supplied Connection Callback functions¶

User-supplied Access Rights Callback functions¶

Put with wait, put callbacks, and put_complete¶

The `get_pv()` function and `_PVcache_` cache of PVs¶

Examples¶

Basic Use¶

Requests including Metadata¶

Example of using info and more properties examples¶

Getting a string value¶

Example of `put()`¶

Example of simple callback¶

Example of connection callback¶

Example of an access rights callback¶

data types	count	char_value
string	1	= value
char	1	= value
short	1	= str(value)
long	1	= str(value)
enum	1	= enum_str[value]
double	1	= (“%%.%if” % (precision)) % value
float	1	= (“%%.%if” % (precision)) % value
char	> 1	= long string from bytes in array
all others	> 1	= <array size=count, type=type>

PV: Epics Process Variables¶

The PV class¶

methods¶

attributes¶

String representation for a PV¶

Automatic Monitoring of a PV¶

User-supplied Callback functions¶

User-supplied Connection Callback functions¶

User-supplied Access Rights Callback functions¶

Put with wait, put callbacks, and put_complete¶

The get_pv() function and _PVcache_ cache of PVs¶

Examples¶

Basic Use¶

Requests including Metadata¶

Example of using info and more properties examples¶

Getting a string value¶

Example of put()¶

Example of simple callback¶

Example of connection callback¶

Example of an access rights callback¶

The `PV` class¶

The `get_pv()` function and `_PVcache_` cache of PVs¶

Example of `put()`¶