PerkinElmer.cpp File Reference

#include <sys/stat.h>
#include <stddef.h>
#include <stdlib.h>
#include <stdarg.h>
#include <math.h>
#include <stdio.h>
#include <errno.h>
#include <string.h>
#include <epicsTime.h>
#include <epicsThread.h>
#include <epicsEvent.h>
#include <epicsExit.h>
#include <epicsMutex.h>
#include <epicsString.h>
#include <epicsStdio.h>
#include <cantProceed.h>
#include <iocsh.h>
#include "ADDriver.h"
#include <epicsExport.h>
#include "PerkinElmer.h"

Macros
#define	DRIVER_VERSION   2
#define	DRIVER_REVISION   8
#define	DRIVER_MODIFICATION   0

Functions
int	PerkinElmerConfig (const char *portName, int IDType, const char *IDValue, int maxBuffers, size_t maxMemory, int priority, int stackSize)
	Configuration command for Perkin Elmer driver; creates a new PerkinElmer object. More...
	epicsExportRegistrar (PerkinElmerRegister)

Macro Definition Documentation

DRIVER_MODIFICATION

#define DRIVER_MODIFICATION   0

DRIVER_REVISION

#define DRIVER_REVISION   8

DRIVER_VERSION

#define DRIVER_VERSION   2

Function Documentation

epicsExportRegistrar()

epicsExportRegistrar

(

PerkinElmerRegister

)

PerkinElmerConfig()

int PerkinElmerConfig	(	const char *	portName,
		int	IDType,
		const char *	IDValue,
		int	maxBuffers,
		size_t	maxMemory,
		int	priority,
		int	stackSize
	)

Configuration command for Perkin Elmer driver; creates a new PerkinElmer object.

Parameters

[in]	portName	The name of the asyn port driver to be created.
[in]	IDType	The type of system ID being specifed in IDValue. Allowed values are: IDType = 0 Frame grabber card or directly connected GigE detector, IDValue = detector index # in system. IDType = 1 GigE detector, IDValue = IP address (e.g. 164.54.160.21) IDType = 2 GigE detector, IDValue = MAC address (e.g. 00005b032e6b, must be lower-case letters) IDType = 3 GigE detector, IDValue = device name (e.g. 8#2608).
[in]	IDValue	The detector ID as explained above (index #, IP name, MAC address, or device name) For IDType=0 then if IDValue="" then the first detector found in the system will be used. For IDType=3 the available device names on the network can be found with the command "asynReport 1 portName"
[in]	maxBuffers	The maximum number of NDArray buffers that the NDArrayPool for this driver is allowed to allocate. Set this to -1 to allow an unlimited number of buffers.
[in]	maxMemory	The maximum amount of memory that the NDArrayPool for this driver is allowed to allocate. Set this to -1 to allow an unlimited amount of memory.
[in]	priority	The thread priority for the asyn port driver thread if ASYN_CANBLOCK is set in asynFlags.
[in]	stackSize	The stack size for the asyn port driver thread if ASYN_CANBLOCK is set in asynFlags.