[Ifeffit] Athena- Demeter 0.9.14 importing data

[abansode at iciq.es]

Hi Bruce,
Thanks for the reply.
Well I wasn’t aware of that actually !
Herewith I am attaching 4 data files. The energy is column no. 2, numerator -12 and denominator is 13,14

Thanks 

Atul 

From: Ravel, Bruce 
Sent: Saturday, May 4, 2013 4:09 PM
To: XAFS Analysis using Ifeffit 
Subject: Re: [Ifeffit] Athena- Demeter 0.9.14 importing data


As I have said many, many, many times on this mailing list, there is nothing I can do to fix -- much less understand -- a problem without being able to reproduce it on my own computer.  

Atul, the reason you have not gotten a response to your post is because you did not provide an example of the data that triggers the problem.  Without that, there truly is nothing I or anyone else can do to help you.

If anyone out there has a suggestion for how I can explain this point, either in this forum in in another location, in a way that will result in people submitting actionable bug reports, I would be very grateful.

B



--------------------------------------------------------------------------------

From: ifeffit-bounces at millenia.cars.aps.anl.gov [ifeffit-bounces at millenia.cars.aps.anl.gov] on behalf of Atul Bansode [abansode at iciq.es]
Sent: Friday, May 03, 2013 6:28 AM
To: ifeffit at millenia.cars.aps.anl.gov
Subject: [Ifeffit] Athena- Demeter 0.9.14 importing data


Hi All,

I am using Athena (Demeter 0.9.14) to process the EXAFS data of Copper samples.

Athena reads the data correctly however my problem is concerned with the importing the data.

When I import the data, in the Athena: Column Selection dialog box the Energy units is shown in keV by default. Since my data is in eV, I can always change the keV to eV and work when it’s a single file.

My problem starts when I try to import multiple files where I choose Energy units as eV in the dialog box however this setting gets applied to the first file only. Remaining data files are read as keV which creates a problem for me to process the data. 



Is there any way to apply same Energy units to all the files while they are getting imported ?

Or is it possible to change the Energy units after importing files ?



I appreciate all your help.



Thanks in advance !



Best regards

Atul 



--------------------------------------------------------------------------------
_______________________________________________
Ifeffit mailing list
Ifeffit at millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20130504/2d8de449/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Cu-1.txt
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20130504/2d8de449/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Cu-2.txt
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20130504/2d8de449/attachment-0001.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Cu-3.txt
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20130504/2d8de449/attachment-0002.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Cu-4.txt
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20130504/2d8de449/attachment-0003.txt>