[Ifeffit] L-edge soft X-ray data in Artemis and Athena

[Ping, Yuan]

Here is a paper on overlapping L-edges that might be helpful.

Yuan 


On 4/11/13 9:37 AM, "Scott Calvin" <scalvin at sarahlawrence.edu> wrote:

>Hi all,
>
>Can the EXAFS of the L1 edge of 3rd row transition elements be analyzed?
>I've never tried it, and the discussion so far has been for the L2 and L3
>edges. I know there would be some interference from the EXAFS of the
>lower edges, but that's just a technical problem, and can be corrected
>for.
>
>--Scott Calvin
>Sarah Lawrence College
>
>
>On Apr 11, 2013, at 10:03 AM, Dr. Dariusz A. Zając <kicaj at ifj.edu.pl>
>wrote:
>
>> Hi,
>> 
>> in Athena you can still normalize data, plot together, etc, but due to
>>that lines L2 and L3 are very closed you will observe no EXAFS
>>oscillations.
>> In opposite I  use Athena and Artemis to analyse EXAFS on e.g. O K edge
>> L edges for EXAFS are useful for mainly 5d and actined elements...
>> 
>> regards
>> kicaj
>> 
>> W dniu 13-04-11 13:46, Shoaib Muhammad pisze:
>>> Hi,
>>>  
>>> I am a research student and relatively new to XAFS. I have soft X-Ray
>>>L-edge data of Mn and Ni. Is it possible to process this data in Athena
>>>and then fit in Artemis like usual K-edge data?
>>>  
>>> Thanks
>>> -- 
>>> Shoaib
>
>_______________________________________________
>Ifeffit mailing list
>Ifeffit at millenia.cars.aps.anl.gov
>http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

-------------- next part --------------
A non-text attachment was scrubbed...
Name: prb2004krappe-BayesianMethod-Ledges.pdf
Type: application/pdf
Size: 138157 bytes
Desc: prb2004krappe-BayesianMethod-Ledges.pdf
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20130411/54b5eaa6/attachment.pdf>