Re: [Ifeffit] Bug report: Artemis cannot re-open saved projects
Hello Sir, I wanted to report that I am facing the same problem as the one faced by Mengling Stuckman (dated: Wed, 19 Mar 2014 11:53:10 -0700.) It does not appear to be problem with the operating system because I am facing the same problem in systems with windows 7 as well as windows xp. I have tried a fresh install on a new system with windows 7 os, and the same problem occurred. Even a simple artemis file in which I have just imported and saved the processed file from athena cannot be re-opened in artemis. Kindly sort out the problem. I have attached one sample artemis file which is giving the problem and also the demeter log file from %APPDATA%\demeter. https://www.mail-archive.com/search?l=ifeffit%40millenia.cars.aps.anl.gov&q=from:%22Mengling+Stuckman%22&o=newest Thanking You, -- Yours Sincerely, Badari Narayana. A. R. Ph.D Student, Nanoscience and Nanotechnology, c/o Prof Rajeev Ranjan, Electroceramics Lab, Department of Materials Engineering, Indian Institute of Science.
I'd guess that the empty fits/ folder is causing the restore_fit()
function in Demeter/UI/Artemis/Project.pm to fail to restore any fits.
It's easy enough to reproduce: Start Artemis, open any Feff input file,
run feff, load no data. Save the project, and quit. The project cannot
be reopened.
Don't know what the best solution is....
--Matt
On Tue, Jun 24, 2014 at 11:21 AM, Badari Rao
Hello Sir, I wanted to report that I am facing the same problem as the one faced by Mengling Stuckman (dated: Wed, 19 Mar 2014 11:53:10 -0700.) It does not appear to be problem with the operating system because I am facing the same problem in systems with windows 7 as well as windows xp. I have tried a fresh install on a new system with windows 7 os, and the same problem occurred. Even a simple artemis file in which I have just imported and saved the processed file from athena cannot be re-opened in artemis. Kindly sort out the problem. I have attached one sample artemis file which is giving the problem and also the demeter log file from %APPDATA%\demeter.
Thanking You, -- Yours Sincerely, Badari Narayana. A. R. Ph.D Student, Nanoscience and Nanotechnology, c/o Prof Rajeev Ranjan, Electroceramics Lab, Department of Materials Engineering, Indian Institute of Science.
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
On 06/24/2014 12:21 PM, Badari Rao wrote:
I wanted to report that I am facing the same problem as the one faced by Mengling Stuckman (dated: Wed, 19 Mar 2014 11:53:10 -0700.) It does not appear to be problem with the operating system because I am facing the same problem in systems with windows 7 as well as windows xp. I have tried a fresh install on a new system with windows 7 os, and the same problem occurred. Even a simple artemis file in which I have just imported and saved the processed file from athena cannot be re-opened in artemis. Kindly sort out the problem. I have attached one sample artemis file which is giving the problem and also the demeter log file from %APPDATA%\demeter.
Here is an early look at the next release. Could you give it a try and let me know if it solves the problem for you. (It works for me on your example project file.) https://s3.amazonaws.com/demeter4xas/Demeter_Installer_for_Windows_0.9.20_pr... B -- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Science Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973 Homepage: http://xafs.org/BruceRavel Software: https://github.com/bruceravel
Here is an early look at the next release. Could you give it a try and let me know if it solves the problem for you. (It works for me on your example project file.)
https://s3.amazonaws.com/demeter4xas/Demeter_Installer_for_Windows_0.9.20_pr... https://s3.amazonaws.com/demeter4xas/Demeter_Installer_for_Windows_0.9.20_pr...
On a 32-bit Windows 7 system, this isn't working for me. With a fresh install I get C:\strawberry\perl>bin\perl5.16.3.exe This version of C:\strawberry\perl\bin\perl5.16.3.exe is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need a x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher. --Matt
On 06/24/2014 02:28 PM, Matt Newville wrote:
Here is an early look at the next release. Could you give it a try and let me know if it solves the problem for you. (It works for me on your example project file.)
https://s3.amazonaws.com/demeter4xas/Demeter_Installer_for_Windows_0.9.20_pr... https://s3.amazonaws.com/demeter4xas/Demeter_Installer_for_Windows_0.9.20_pr...
On a 32-bit Windows 7 system, this isn't working for me. With a fresh install I get
Good point. The thing on the other end of that link will only work on a 64 bit system. I am going to build a 32-bit version as well, but haven't gotten around to it yet. B -- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Science Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973 Homepage: http://xafs.org/BruceRavel Software: https://github.com/bruceravel
Dear all, Just want to add, on a 64bit Windows 8 it installed without any problem. (If I have understood the problem being discussed here correctly), I have performed following steps: 1- Opened Artemis 2- Imported "Atoms" file and run "Feff Calculation" 3- Saved the project 4- Opened the saved project file, it opens with previous Feff Calculations along with a nice message "It seems that you have not actually performed a fit in this fitting project" Regards, /Shoaib -----Original Message----- From: ifeffit-bounces@millenia.cars.aps.anl.gov [mailto:ifeffit-bounces@millenia.cars.aps.anl.gov] On Behalf Of Bruce Ravel Sent: Wednesday, June 25, 2014 3:33 AM To: XAFS Analysis using Ifeffit Subject: Re: [Ifeffit] Bug report: Artemis cannot re-open saved projects On 06/24/2014 02:28 PM, Matt Newville wrote:
Here is an early look at the next release. Could you give it a try and let me know if it > solves the problem for you. (It works for me on your example project file.)
https://s3.amazonaws.com/demeter4xas/Demeter_Installer_for_Windows_0.9 .20_pre5.exe <https://s3.amazonaws.com/demeter4xas/Demeter_Installer_for_Windows_0. 9.20_pre5.exe>
On a 32-bit Windows 7 system, this isn't working for me. With a fresh install I get
Good point. The thing on the other end of that link will only work on a 64 bit system. I am going to build a 32-bit version as well, but haven't gotten around to it yet. B -- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Science Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973 Homepage: http://xafs.org/BruceRavel Software: https://github.com/bruceravel _______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Hi Bruce, All, Sorry if I wasn't clear earlier: Version 0.9.20_pre5 does works for me on 64bit Windows7 to read in a project with a Feff calculation but without any fits in it. --Matt
participants (4)
-
Badari Rao -
Bruce Ravel -
Matt Newville -
Shoaib Muhammad