Demeter 0.9.26 launch faillure
Dear Bruce, I have trouble running the Demeter 0.9.26_pre2 (64bit). When I start Artemis after installation of Demeter, it closes after showing nothing but the usual temple picture. Logfile is attached. The problem is analogous on both Win7 SP1 and Win8.1 and repeats also for Athena and Hephaestus. Could you please tell whether there is something I can do to fix it? Versions 0.9.25 and 0.9.24 start without problems. I know that 0.9.26 is a preview version, but I was installing it only to get the possibility to actually use the user-supplied value of epsilon_k for fitting multiple dataset. If it is difficult to make the version 0.9.26 available soon, maybe in 0.9.25 there is a possibility to set R-factor as a figure of merit for fitting rather than chi^2? That might also help. Thank you All the best, Kirill Lomachenko -- Dr. Kirill A. Lomachenko Scientist at BM23/ID24 beamlines European Synchrotron Radiation Facility (ESRF) 71 avenue des Martyrs CS 40220 38043 Grenoble Cedex 9, France Tel: +33 438 88 19 14 www.esrf.eu
Hello,
I experienced the same problem but find out that in the ini file, the wrong directory was used (strawberry as in older version) for locating the executables.
Once you correct it, it will work.
Greetings
Kathy
Envoyé depuis mon HTC
----- Message de réponse -----
De : "Kirill Lomachenko"
Hi, In case you don't know where you can make this change, if you can't start the program to edit it via the preferences, it is in the [gnuplot] section of demeter.ini which is in the same directory as the log. For me, the relevant line reads: program = C:\Users\ragordon\AppData\Roaming\DemeterPerl\c\bin\gnuplot\bin\gnuplot.exe Issue was known from: https://www.mail-archive.com/ifeffit@millenia.cars.aps.anl.gov/msg06034.html -R. On 12/6/2017 7:57 AM, Dardenne, Kathy (INE) wrote:
Hello,
I experienced the same problem but find out that in the ini file, the wrong directory was used (strawberry as in older version) for locating the executables. Once you correct it, it will work.
Greetings
Kathy
Envoyé depuis mon HTC
----- Message de réponse ----- De : "Kirill Lomachenko"
Pour : "ifeffit@millenia.cars.aps.anl.gov" Objet : [Ifeffit] Demeter 0.9.26 launch faillure Date : mer., déc. 6, 2017 16:08 Dear Bruce, I have trouble running the Demeter 0.9.26_pre2 (64bit). When I start Artemis after installation of Demeter, it closes after showing nothing but the usual temple picture. Logfile is attached. The problem is analogous on both Win7 SP1 and Win8.1 and repeats also for Athena and Hephaestus. Could you please tell whether there is something I can do to fix it? Versions 0.9.25 and 0.9.24 start without problems.
I know that 0.9.26 is a preview version, but I was installing it only to get the possibility to actually use the user-supplied value of epsilon_k for fitting multiple dataset. If it is difficult to make the version 0.9.26 available soon, maybe in 0.9.25 there is a possibility to set R-factor as a figure of merit for fitting rather than chi^2? That might also help.
Thank you
All the best, Kirill Lomachenko
-- Dr. Kirill A. Lomachenko Scientist at BM23/ID24 beamlines European Synchrotron Radiation Facility (ESRF) 71 avenue des Martyrs CS 40220 38043 Grenoble Cedex 9, France Tel: +33 438 88 19 14 www.esrf.eu http://www.esrf.eu
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit
participants (3)
-
Dardenne, Kathy (INE)
-
Kirill Lomachenko
-
Robert Gordon