dementer Artemis crashing on XP
Hello all, I recently (yesterday) installed the new Dementer package with Strawberry perl on a freshly installed XP Pro SP3. I have tried to open a couple different old Artemis projects (.apj) and once chosen, (D) Artemis shuts down immediately with no warnings messages. The message line reads something like - "converting data to Dementer fit serialization" and then everything disappears. I have attached one of the projects I attempted to open. I can open data from previous Athena projects with no problem. Any help would be appreciated. buena salud, Chris Patridge
By the way, the package is named after her: http://en.wikipedia.org/wiki/Demeter not them: http://en.wikipedia.org/wiki/Dementor#Dementors Although, naming XAS software after soul-sucking fiends certainly makes sense :) B On Thursday, August 18, 2011 02:09:24 pm Christopher Patridge wrote:
Hello all,
I recently (yesterday) installed the new Dementer package with Strawberry perl on a freshly installed XP Pro SP3. I have tried to open a couple different old Artemis projects (.apj) and once chosen, (D) Artemis shuts down immediately with no warnings messages. The message line reads something like - "converting data to Dementer fit serialization" and then everything disappears. I have attached one of the projects I attempted to open. I can open data from previous Athena projects with no problem. Any help would be appreciated.
buena salud,
Chris Patridge
-- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973 My homepage: http://xafs.org/BruceRavel EXAFS software: http://cars9.uchicago.edu/ifeffit/Demeter
Hi Chris, It turned out to be a small, easily fixed typo. I am planning on making yet another new release of Demeter this afternoon before going home. I'll add you to the list of people I email about it. For future reference, when the new codes crash, they try to write a file with names like "dathena.log" and so on. You can find this in %APPDATA%\demeter. On XP, %APPDATA% is something like C:\Documents and Settings\<user name>\Application Data That file gets overwritten the next time you fire up the program, so be sure to snag it before doing so. If you send along that file, it helps me figure out what's going wrong. B On Thursday, August 18, 2011 02:09:24 pm Christopher Patridge wrote:
Hello all,
I recently (yesterday) installed the new Dementer package with Strawberry perl on a freshly installed XP Pro SP3. I have tried to open a couple different old Artemis projects (.apj) and once chosen, (D) Artemis shuts down immediately with no warnings messages. The message line reads something like - "converting data to Dementer fit serialization" and then everything disappears. I have attached one of the projects I attempted to open. I can open data from previous Athena projects with no problem. Any help would be appreciated.
buena salud,
Chris Patridge
-- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973 My homepage: http://xafs.org/BruceRavel EXAFS software: http://cars9.uchicago.edu/ifeffit/Demeter
Hello Bruce,
I retested the crash to get the text file you mentioned. I think I found
the right one which is attached. Hope this helps the debug.
Chris
On Thu, Aug 18, 2011 at 11:40 AM, Bruce Ravel
Hi Chris,
It turned out to be a small, easily fixed typo.
I am planning on making yet another new release of Demeter this afternoon before going home. I'll add you to the list of people I email about it.
For future reference, when the new codes crash, they try to write a file with names like "dathena.log" and so on. You can find this in %APPDATA%\demeter. On XP, %APPDATA% is something like
C:\Documents and Settings\<user name>\Application Data
That file gets overwritten the next time you fire up the program, so be sure to snag it before doing so. If you send along that file, it helps me figure out what's going wrong.
B
On Thursday, August 18, 2011 02:09:24 pm Christopher Patridge wrote:
Hello all,
I recently (yesterday) installed the new Dementer package with Strawberry perl on a freshly installed XP Pro SP3. I have tried to open a couple different old Artemis projects (.apj) and once chosen, (D) Artemis shuts down immediately with no warnings messages. The message line reads something like - "converting data to Dementer fit serialization" and then everything disappears. I have attached one of the projects I attempted to open. I can open data from previous Athena projects with no problem. Any help would be appreciated.
buena salud,
Chris Patridge
--
Bruce Ravel ------------------------------------ bravel@bnl.gov
National Institute of Standards and Technology Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973
My homepage: http://xafs.org/BruceRavel EXAFS software: http://cars9.uchicago.edu/ifeffit/Demeter _______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Hi Chris, I am a little confused about the timing of the quoted email. Did you send that before or after downloading and installing the new release that I announced on Thursday afternoon. That is, I am trying to figure out if this problem persists for you in the latest release. Thanks, B On Thursday, August 18, 2011 06:30:06 pm Christopher Patridge wrote:
Hello Bruce,
I retested the crash to get the text file you mentioned. I think I found the right one which is attached. Hope this helps the debug.
Chris
On Thu, Aug 18, 2011 at 11:40 AM, Bruce Ravel
wrote: Hi Chris,
It turned out to be a small, easily fixed typo.
I am planning on making yet another new release of Demeter this afternoon before going home. I'll add you to the list of people I email about it.
For future reference, when the new codes crash, they try to write a file with names like "dathena.log" and so on. You can find this in %APPDATA%\demeter. On XP, %APPDATA% is something like
C:\Documents and Settings\<user name>\Application Data
That file gets overwritten the next time you fire up the program, so be sure to snag it before doing so. If you send along that file, it helps me figure out what's going wrong.
B
On Thursday, August 18, 2011 02:09:24 pm Christopher Patridge wrote:
Hello all,
I recently (yesterday) installed the new Dementer package with Strawberry perl on a freshly installed XP Pro SP3. I have tried to open a couple different old Artemis projects (.apj) and once chosen, (D) Artemis shuts down immediately with no warnings messages. The message line reads something like - "converting data to Dementer fit serialization" and then everything disappears. I have attached one of the projects I attempted
to
open. I can open data from previous Athena projects with no problem.
Any
help would be appreciated.
buena salud,
Chris Patridge
--
Bruce Ravel ------------------------------------ bravel@bnl.gov
National Institute of Standards and Technology Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973
My homepage: http://xafs.org/BruceRavel EXAFS software: http://cars9.uchicago.edu/ifeffit/Demeter
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
-- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973 My homepage: http://xafs.org/BruceRavel EXAFS software: http://cars9.uchicago.edu/ifeffit/Demeter
participants (2)
-
Bruce Ravel
-
Christopher Patridge