Re: [Ifeffit] Athena crash during LCA
Jeff--sorry, I guess my grammar got a little convoluted. It DOES work with norm(E) and deriv(E) fitting for me as well. It does NOT work with chi(k) fitting for me. --Scott Calvin Faculty at Sarah Lawrence College Currently on sabbatical at Stanford Synchrotron Radiation Laboratory On Jan 7, 2011, at 7:58 PM, Jeff Terry wrote:
Did not try really hard to work with it.
Fitting Data as norm(E) from -20.000 to 30.000
Fit included 98 data points and 3 variables R-factor = 0.000263 chi-square = 0.04347 reduced chi-square = 0.0004482
group weight ======================================= 2: Standard 1 1.000(0.000) 3: Standard 2 0.455(0.000)
group e0 shift ======================================= 2: Standard 1 -0.905( 0.000) 3: Standard 2 -0.905( 0.000)
On Jan 7, 2011, at 8:07 PM, Scott Calvin wrote:
Hi all,
Athena has been crashing for me during one particular linear combination analysis, and I'm wondering if any of you have an explanation. A project file which demonstrates the problem is attached. I am using Athena 0.8.054 with ifeffit 1.2.10 on a MacBook Pro using OS 10.5.8.
The behavior can be seen by trying to fit the Data group by using a linear combination of Standard 1 and Standard 2 in chi(k). It gets as far as "plotting in k-space from group 'Data'...done!' and then hangs, with the watch icon remaining indefinitely. This doesn't happen in norm(E) or deriv(E) fits, and doesn't happen when Standard 1 is not used. But Standard 1 appears to have uncorrupted chi(k) data when plotted directly. Standard 1 is from one of the XDAC lines at NSLS, as are the standards that work.
I've tried saving Standard 1 and reading it in as a new group, but no luck. I've also looked at the data in Standard 1, and I don't see anything out of place, such as a place where the energy backs up. I've tried starting the chi(k) file with zero values, truncating the end values, and changing the background spline to end at the same point the data does. And it always hangs at the same point.
Any ideas? I'd like to use this data for a workshop next week!
--Scott Calvin Faculty at Sarah Lawrence College Currently on sabbatical at Stanford Synchrotron Radiation Laboratory
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Hi Scott, No my fault, I suffer from tl;dr itis. I didn't read beyond linear combination. That said it still works: Fitting Data as chi(k) from 3.000 to 12.000 fit done use k-weight = 2 Fit included 181 data points and 1 variable R-factor = 0.209356 chi-square = 30.92638 reduced chi-square = 0.1718132 group weight ======================================= 2: Standard 1 0.436(0.016) 3: Standard 2 0.564(0.016) Jeff On Jan 7, 2011, at 10:24 PM, Scott Calvin wrote:
Jeff--sorry, I guess my grammar got a little convoluted. It DOES work with norm(E) and deriv(E) fitting for me as well. It does NOT work with chi(k) fitting for me.
--Scott Calvin Faculty at Sarah Lawrence College Currently on sabbatical at Stanford Synchrotron Radiation Laboratory
On Jan 7, 2011, at 7:58 PM, Jeff Terry wrote:
Did not try really hard to work with it.
Fitting Data as norm(E) from -20.000 to 30.000
Fit included 98 data points and 3 variables R-factor = 0.000263 chi-square = 0.04347 reduced chi-square = 0.0004482
group weight ======================================= 2: Standard 1 1.000(0.000) 3: Standard 2 0.455(0.000)
group e0 shift ======================================= 2: Standard 1 -0.905( 0.000) 3: Standard 2 -0.905( 0.000)
On Jan 7, 2011, at 8:07 PM, Scott Calvin wrote:
Hi all,
Athena has been crashing for me during one particular linear combination analysis, and I'm wondering if any of you have an explanation. A project file which demonstrates the problem is attached. I am using Athena 0.8.054 with ifeffit 1.2.10 on a MacBook Pro using OS 10.5.8.
The behavior can be seen by trying to fit the Data group by using a linear combination of Standard 1 and Standard 2 in chi(k). It gets as far as "plotting in k-space from group 'Data'...done!' and then hangs, with the watch icon remaining indefinitely. This doesn't happen in norm(E) or deriv(E) fits, and doesn't happen when Standard 1 is not used. But Standard 1 appears to have uncorrupted chi(k) data when plotted directly. Standard 1 is from one of the XDAC lines at NSLS, as are the standards that work.
I've tried saving Standard 1 and reading it in as a new group, but no luck. I've also looked at the data in Standard 1, and I don't see anything out of place, such as a place where the energy backs up. I've tried starting the chi(k) file with zero values, truncating the end values, and changing the background spline to end at the same point the data does. And it always hangs at the same point.
Any ideas? I'd like to use this data for a workshop next week!
--Scott Calvin Faculty at Sarah Lawrence College Currently on sabbatical at Stanford Synchrotron Radiation Laboratory
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit _______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
participants (2)
-
Jeff Terry -
Scott Calvin