python accesses outlook PST files during X-ray larch binary installation on Windows 10 computer
Dear All I apologize for this question related to IT safety rather than science and the use of Larch. Today, I installed Larch for Windows on an institute computer using the latest Windows 64-bit binary installer (0.9.68). Now I got the following alert from our IT security: “The process c:\users\%USER%\appdata\local\xraylarch\python.exe accessed Outlook files. The user who ran the process was XXXX. The accessed files were: XXXX.pst, YYYY.pst”. It seems that during the installation of Larch, python.exe accessed some outlook archive files in another folder on the C drive, and I do not know if this should be a matter of concern. Has anyone experienced a similar behavior before, or does anyone with Larch/python skills have an explanation for this? Cheers, Andreas
Hi Andreas,
Sorry for the trouble. We are not purposefully trying to launch Outlook -
I would not wish that on anyone! I have seen a similar issue on some
Windows machines in the past, where either the default mail program, such
as Outlook, or web browser, or sometimes the system Calculator would be
launched, possibly in the background, but that might prompt the user to
sign-in or set up the mail/browser system. When I looked into this (now ~5
years ago), I could get this to happen and narrowed it down to certain
wxPython components, but ones that we do use regularly.
Slightly "in the weeds": At the suggestion of wxPython developers, I
added a wrapper around Python opening a process or doing the equivalent of
a Windows "Start" command that would print out a message before doing such
a "start". In a classic debugging story, adding that wrapper never showed
the actual problem, but also made the problem appear to go away. I have
not seen this bug in years. About a year ago, I was doing some "cleanup"
and removed this wrapper. I have not seen or heard of the problem since.
But, I will add this back. With that back in place, if you (or anyone
else) sees this happen, please look at the Windows cmd shell for any
messages that might show up and let me know.
I'm hoping to tag and push 0.9.69 out to PyPI today or early tomorrow, and
this will be included. FWIW, 0.9.69 will be a "beta"-like pre-release and
not yet pushed out as an automatic update, and a more official release of
0.9.70 probably by next Monday. In fact, one of the problems to solve is
the failure of automatic updates on Windows. I'll send out more complete
announcements for both of these.
On Mon, Jun 5, 2023 at 9:26 AM Voegelin, Andreas
Dear All
I apologize for this question related to IT safety rather than science and the use of Larch.
Today, I installed Larch for Windows on an institute computer using the latest Windows 64-bit binary installer (0.9.68). Now I got the following alert from our IT security: “The process c:\users\%USER%\appdata\local\xraylarch\python.exe accessed Outlook files. The user who ran the process was XXXX. The accessed files were: XXXX.pst, YYYY.pst”.
It seems that during the installation of Larch, python.exe accessed some outlook archive files in another folder on the C drive, and I do not know if this should be a matter of concern. Has anyone experienced a similar behavior before, or does anyone with Larch/python skills have an explanation for this?
Cheers, Andreas
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit
Dear Matt
Thank you for your prompt response. I will install version 0.9.70 next week and check with our IT if the issue appears again.
One thing I noted: Of several pst files in one folder, only two were accessed by python during the installation of Larch. These files happen to be the ones which are also accessed by outlook whenever I run outlook on the same computer.
Best, Andreas
From: Ifeffit
participants (2)
-
Matt Newville -
Voegelin, Andreas