Re: [Ifeffit] Ifeffit on Windows Vista
On Monday 05 March 2007 12:28, Francesc Sepulcre wrote:
Dear Bruce,
Is just to know if is possible to install ifeffit (Artemis, Athena,...) on Windows Vista. If yes, please, let me know how to do this, because Im trying to install version 1.2.9 but doesnt works.
Please, excuse me if this is not the correct way to ask about this problem.
Hi Francesc, I am forwarding my response to the Ifeffit mailing list (which is the best forum for questions of this sort.) To join, go to: http://cars9.uchicago.edu/mailman/listinfo/ifeffit/ I am not in a position to comment. I don't have a Vista machine of my own. Nor does Matt, as far as I know. So we certainly have not yet tested the software on Vista. Is anyone on the list using Vista yet? Any hints for Francesc about getting the installer to work? Francesc, perhaps if you could give us some more information about how it fails -- screenshots, transcriptions of error messages, something that gives a clue as to what the problem is -- someone may be able to make a useful suggestion. B -- Bruce Ravel ---------------------------------------------- bravel@anl.gov Molecular Environmental Science Group, Building 203, Room E-165 MRCAT, Sector 10, Advanced Photon Source, Building 433, Room B007 Argonne National Laboratory phone and voice mail: (1) 630 252 5033 Argonne IL 60439, USA fax: (1) 630 252 9793 My homepage: http://cars9.uchicago.edu/~ravel EXAFS software: http://cars9.uchicago.edu/~ravel/software/exafs/
Hello
Beware Vista. I have been informed that a major problem is that Vista
requires drivers that are very specific to it. There can be 2 problems
- the (new) machine you have (presuming it comes with Vista) may have
on-board hardware that ONLY Vista drivers can recognize in which case
(a) the software (ifeffit) will probably not be able to call them and
(b) a back step to an XP op system will create a situation in which
your XP software will not recognize the on-board hardware so that you
cannot operate at all (this means a step back is no solution) OR (2)
if you put Vista onto an older machine, the on-board components for
graphics etc may not be recognized by the new Vista drivers. One then
will descend into the driver Black Hole from which recovery may be
very time consuming!! (stick with XP). I am told that Vista drivers
are spotty. I have not ventured into Vista-land so my comments are
hearsay and recent experiences of my gung-ho colleagues makes me
reluctant to do so!! If people have solid solutions to these problems,
it would be nice to hear about them.
R
Quoting Bruce Ravel
On Monday 05 March 2007 12:28, Francesc Sepulcre wrote:
Dear Bruce,
Is just to know if is possible to install ifeffit (Artemis, Athena,...) on Windows Vista. If yes, please, let me know how to do this, because Im trying to install version 1.2.9 but doesnt works.
Please, excuse me if this is not the correct way to ask about this problem.
Hi Francesc,
I am forwarding my response to the Ifeffit mailing list (which is the best forum for questions of this sort.) To join, go to: http://cars9.uchicago.edu/mailman/listinfo/ifeffit/
I am not in a position to comment. I don't have a Vista machine of my own. Nor does Matt, as far as I know. So we certainly have not yet tested the software on Vista.
Is anyone on the list using Vista yet? Any hints for Francesc about getting the installer to work?
Francesc, perhaps if you could give us some more information about how it fails -- screenshots, transcriptions of error messages, something that gives a clue as to what the problem is -- someone may be able to make a useful suggestion.
B
-- Bruce Ravel ---------------------------------------------- bravel@anl.gov
Molecular Environmental Science Group, Building 203, Room E-165 MRCAT, Sector 10, Advanced Photon Source, Building 433, Room B007
Argonne National Laboratory phone and voice mail: (1) 630 252 5033 Argonne IL 60439, USA fax: (1) 630 252 9793
My homepage: http://cars9.uchicago.edu/~ravel EXAFS software: http://cars9.uchicago.edu/~ravel/software/exafs/
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
************************************************************ Ronald G. Cavell E-mail: Ron.Cavell@Ualberta.ca Professor of Chemistry Voice: 780-492-5310 Department of Chemistry Fax: 780-492-8231 University of Alberta, Edmonton, Alberta, Canada T6G 2G2
participants (2)
-
Bruce Ravel
-
rcavell@ualberta.ca