Re: [Ifeffit] Ifeffit Digest, Vol 113, Issue 17
Hi Anatoly,
I've only tried approximating using the short bond at 2 A up until now.
Below are the spectra that I'm trying to interpret. These are merged QEXAFS
data taken at increasing temperature under WGS conditions. Perhaps I
haven't processed them well enough? There certainly seem to be changes
taking place during the course of reaction, which I'm trying to interpret.
Given that the material starts out very well dispersed (I've observed many
sub-nm Pt clusters via ac-STEM) and grow to 1-2 nm particles during
reaction, I would expect to observe corresponding structural changes during
reaction. I also observe significant changes in the EXAFS spectra when
alternating between WGS gas and He - hence my thought to including some
kind of Pt-C and Pt-O paths, similar to those used in the Ir4(CO)12 work.
Thanks for any help!
Branko
On Sat, Jul 28, 2012 at 1:00 PM,
Send Ifeffit mailing list submissions to ifeffit@millenia.cars.aps.anl.gov
To subscribe or unsubscribe via the World Wide Web, visit http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit or, via email, send a message with subject or body 'help' to ifeffit-request@millenia.cars.aps.anl.gov
You can reach the person managing the list at ifeffit-owner@millenia.cars.aps.anl.gov
When replying, please edit your Subject line so it is more specific than "Re: Contents of Ifeffit digest..."
Today's Topics:
1. Re: Modeling Pt/C Catalyst Under WGS Conditions (Anatoly I Frenkel)
----------------------------------------------------------------------
Message: 1 Date: Sat, 28 Jul 2012 01:02:23 +0000 From: Anatoly I Frenkel
To: XAFS Analysis using Ifeffit Subject: Re: [Ifeffit] Modeling Pt/C Catalyst Under WGS Conditions Message-ID: <98fc47e6-bd47-4c56-8fb2-3385fa7dbbbe@blur> Content-Type: text/plain; charset="utf-8" Maybe your system is more complex? Have you included a long Pt-O bond at around 2.5 A or just a short one at around 2A? Hard to help without seeing what the problem is.
Anatoly
Sent from my mobile phone, please forgive typos
-----Original message----- From: Branko Zugic
To: "ifeffit@millenia.cars.aps.anl.gov" Sent: Fri, Jul 27, 2012 15:28:37 GMT+00:00 Subject: [Ifeffit] Modeling Pt/C Catalyst Under WGS Conditions
Hello,
I am trying to interpret some in-situ Quick-EXAFS and EXAFS data that I took under water-gas shift conditions (CO + H2O diluted in He) on some Pt/C catalysts. I'm finding that the Pt-Pt and Pt-O fits using foil data, Pt-O standards, and quick 1st shell approximations for Pt-O aren't that great. After looking through the literature I came across some papers (i.e. http://pubs.acs.org/doi/abs/10.1021/jp983283e) that use the Ir-O and Ir-C interactions from Ir4(CO)12 to approximate Pt-O and Pt-C interactions. I then found some crystallographic tables for Ir4(CO)12 (below), but it's unclear to me whether I can use this to create an atoms inp file (and whether the data is for the structure I'm looking for or the referenced Ir(CO)3). So far I've had no luck.
Is this a reasonable approach to this problem? Is the information I have enough to do this? Any suggestions as to where I may be able to find the crystallographic data I am looking for?
Branko Zugic
-- PhD Candidate Tufts University, Chemical and Biological Engineering 4 Colby Street, Room 226 Medford, MA 02155 Ph: (O) 617 627 2267 (H) 508 414 8555 Email: Branko.Zugic@tufts.edumailto:Branko.Zugic@tufts.edu, brankozugic@gmail.commailto:brankozugic@gmail.com
participants (1)
-
Branko Zugic