different edge step by linux and window vista
Dear all, It seems there is a problem when I use athena to open the file under the windows vista environment. According to the specific scan channel, the data gave the big different edge step by linux and windows.(Other parameters are similar), and the figures seem strange(I do not know what caused it). Now I am sending the screen-shot that I see. Please help me about that. Thank a lot. Shanshan Liu BCPS Dept. Illinois Institute of Technology
Hi Shanshan, A few questions: 1. Are the normalization orders the same? (Click the Show additional parameters button in the background removal section to see that parameter.) 2. Are the values of spline clamps the same. (Also visible among the additional parameters.) 3. Are the numerical values associated with the spline clamps the same? (The values are set among the preferences. Look for the Clamp group on the preferences dialog.) Another thing to look at is the contents of the Ifeffit buffer immediately after making those plots. Are there any obvious differences in the commands sent to Ifeffit on the two platforms? B -- Bruce Ravel ----------------------------------- bravel@bnl.gov National Institute of Standards and Technology Synchrotron Methods Group at Brookhaven National Laboratory Building 535A Upton NY, 11973 My homepage: http://cars9.uchicago.edu/~ravel EXAFS software: http://cars9.uchicago.edu/~ravel/software/exafs/ -----Original Message----- From: ifeffit-bounces@millenia.cars.aps.anl.gov on behalf of Shanshan Liu Sent: Wed 12/12/2007 12:58 PM To: ifeffit@millenia.cars.aps.anl.gov Subject: [Ifeffit] different edge step by linux and window vista Dear all, It seems there is a problem when I use athena to open the file under the windows vista environment. According to the specific scan channel, the data gave the big different edge step by linux and windows.(Other parameters are similar), and the figures seem strange(I do not know what caused it). Now I am sending the screen-shot that I see. Please help me about that. Thank a lot. Shanshan Liu BCPS Dept. Illinois Institute of Technology
Hi Bruce,
I checked and it shows that all the values are the same in both platforms.
Thanks.
Sincerely,
Shanshan Liu
----- Original Message -----
From: "Ravel, Bruce"
Hi Shanshan,
A few questions:
1. Are the normalization orders the same? (Click the Show additional parameters button in the background removal section to see that parameter.) 2. Are the values of spline clamps the same. (Also visible among the additional parameters.) 3. Are the numerical values associated with the spline clamps the same? (The values are set among the preferences. Look for the Clamp group on the preferences dialog.)
Another thing to look at is the contents of the Ifeffit buffer immediately after making those plots. Are there any obvious differences in the commands sent to Ifeffit on the two platforms?
B
-- Bruce Ravel ----------------------------------- bravel@bnl.gov
National Institute of Standards and Technology Synchrotron Methods Group at Brookhaven National Laboratory Building 535A Upton NY, 11973
My homepage: http://cars9.uchicago.edu/~ravel EXAFS software: http://cars9.uchicago.edu/~ravel/software/exafs/
-----Original Message----- From: ifeffit-bounces@millenia.cars.aps.anl.gov on behalf of Shanshan Liu Sent: Wed 12/12/2007 12:58 PM To: ifeffit@millenia.cars.aps.anl.gov Subject: [Ifeffit] different edge step by linux and window vista
Dear all,
It seems there is a problem when I use athena to open the file under the windows vista environment.
According to the specific scan channel, the data gave the big differentedge step by linux and windows.(Other parameters are similar), and the figures seem strange(I do not know what caused it). Now I am sending the screen-shot that I see. Please help me about that.
Thank a lot.
Shanshan Liu
BCPS Dept. Illinois Institute of Technology
On Wednesday 12 December 2007 14:08:40 Shanshan Liu wrote:
Hi Bruce,
I checked and it shows that all the values are the same in both platforms.
Hi Shanshan, Sorry I never got back on this issue -- I was busy with beamtime. I am not sure what else I can do to help you troubleshoot your problem. Without data or a project file and without any information about what Ifeffit commands were actually sent to Ifeffit, all I can do is acknowledge that the screenshots you sent do, indeed, indicate that your problem is real. Like I say all the time on this mailing list, if you do not provide me with enough information to replicate the problem on my own computers, I am unlikely to be able to solve it. B -- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973 My homepage: http://xafs.org/BruceRavel EXAFS software: http://cars9.uchicago.edu/~ravel/software/exafs/
Hi Bruce,
Thanks for your email. Here is the thing. I checked all the data. It
shows big difference of edge step at some scans. Now I attach one scan
with this problem for you. Please take a look at it. The scan is CMC
file.(Column 8 should be i0 and Column 10 should be i2. Columns 25 to
32 are the individual elements.)
Thanks again.
Sincerely,
Shanshan Liu
BCPS Dept.
Illinois Institute of Technology
----- Original Message -----
From: Bruce Ravel
Hi Bruce,
I checked and it shows that all the values are the same in both
On Wednesday 12 December 2007 14:08:40 Shanshan Liu wrote: platforms. Hi Shanshan,
Sorry I never got back on this issue -- I was busy with beamtime.
I am not sure what else I can do to help you troubleshoot your problem. Without data or a project file and without any information about what Ifeffit commands were actually sent to Ifeffit, all I can do is acknowledge that the screenshots you sent do, indeed, indicate that your problem is real. Like I say all the time on this mailing list, if you do not provide me with enough information to replicate the problem on my own computers, I am unlikely to be able to solve it.
B
-- Bruce Ravel ------------------------------------ bravel@bnl.gov
National Institute of Standards and Technology Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973
My homepage: http://xafs.org/BruceRavel EXAFS software: http://cars9.uchicago.edu/~ravel/software/exafs/
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
participants (3)
-
Bruce Ravel
-
Ravel, Bruce
-
Shanshan Liu