Possible bug in Artemis.
Hi, When I import a feff calculation, or run feff, the paths show up in artemis, but the description is garbled. What I mean is that the path description under Scattering Path which normally looks like [+] Cl [+] O ... looks like [+] <?> [+] <?> ... and if I save the project file and reopen it, it can't I have attached a screenshot. Here is some info on my software 1) artemis 0.8.004 2) ifeffit 1.2.8 3) perl -e 'use Tk; print $Tk::VERSION,$/' gives 804.027 4) perl v5.8.7 I tried updating Tk, and that works about as well as it always has on my system. Most of the tests passed, a few failed. This may be a problem with my version of Linux, or my version of perl/Tk. Anyway, any help would be much appreciated. Thank you very much, Josh Kas
On Monday 23 January 2006 17:47, joshua jason kas wrote:
Hi, When I import a feff calculation, or run feff, the paths show up in artemis, but the description is garbled. What I mean is that the path description under Scattering Path which normally looks like
[+] Cl [+] O ...
looks like
[+] <?> [+] <?> ...
This looks like another version of a bug that has cropped up here and there. The algorithm for generating the interpretation page parses the feff.inp file and a couple of feff's output files. Every so often, someone throws a hand-made feff.inp file at Artemis that works in feff but breaks the rather crufty parser I wrote. If you can send me the feff.inp file that would help. The artemis project file might help also, so send that along. Even if it is one that makes Artemis do bad things when you try to read, I can still peak on the inside and figure out what's going on. B -- Bruce Ravel ---------------------------------------------- bravel@anl.gov Molecular Environmental Science Group, Building 203, Room E-165 MRCAT, Sector 10, Advanced Photon Source, Building 433, Room B007 Argonne National Laboratory phone and voice mail: (1) 630 252 5033 Argonne IL 60439, USA fax: (1) 630 252 9793 My homepage: http://cars9.uchicago.edu/~ravel EXAFS software: http://cars9.uchicago.edu/~ravel/software/
Josh,
Have a try to set the absorber coordinate as origin (0 0 0) in feff.inp,
then it should work.
Ye
----- Original Message -----
From: "joshua jason kas"
Hi, When I import a feff calculation, or run feff, the paths show up in artemis, but the description is garbled. What I mean is that the path description under Scattering Path which normally looks like
[+] Cl [+] O ...
looks like
[+] <?> [+] <?> ...
and if I save the project file and reopen it, it can't I have attached a screenshot. Here is some info on my software 1) artemis 0.8.004 2) ifeffit 1.2.8 3) perl -e 'use Tk; print $Tk::VERSION,$/' gives 804.027 4) perl v5.8.7
I tried updating Tk, and that works about as well as it always has on my system. Most of the tests passed, a few failed. This may be a problem with my version of Linux, or my version of perl/Tk. Anyway, any help would be much appreciated. Thank you very much, Josh Kas
--------------------------------------------------------------------------------
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
participants (3)
-
Bruce Ravel
-
joshua jason kas
-
TAO, Ye