Hi Robert, Thank you so much! These are very helpful, and if anyone else has any additional standards, we would be very grateful. Best, Danielle Danielle R. Schlesinger, Ph.D. Post Doctoral Fellow – AOS/QPC Johns Hopkins University – Applied Physics Laboratory Tel: (240) 592-5243 From: Ifeffit on behalf of Robert Gordon Reply-To: XAFS Analysis using Ifeffit Date: Tuesday, June 29, 2021 at 2:32 PM To: XAFS Analysis using Ifeffit Subject: [EXT] Re: [Ifeffit] Bi L3 standards APL external email warning: Verify sender ifeffit-bounces@millenia.cars.aps.anl.gov before clicking links or attachments I have Bi metal foil and Bi2O3 you are welcome to use. Data were published in: dx.doi.org/10.1021/jp502996thttp://dx.doi.org/10.1021/jp502996t|J. Phys. Chem. C2014, 118, 9696−9705 Some other standards are visible in here: Journal of Nuclear Materials 420 (2012) 116–122 ... D.A. McKeown et al. -R. On Tue, Jun 29, 2021 at 7:58 AM Schlesinger, Danielle R. mailto:Danielle.Schlesinger@jhuapl.edu> wrote: Hi everyone, Does anyone have a set of Bi L3 edge standards that they would be willing to share? Thank you! Danielle Danielle R. Schlesinger, Ph.D. Post Doctoral Fellow – AOS/QPC Johns Hopkins University – Applied Physics Laboratory Tel: (240) 592-5243 _______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.govmailto:Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit