Hi Bradley, I'm using 0.9.10 on Win7 and I'm seeing the same thing. The problem might be related to initializing the plot window with the "Athena: Column Selection" dialog when the file being read has a large number of columns. I can load this file into an already-existing project without a problem, when that project already has the plot window initialized and displaying earlier data prior to loading your raw data. But if I have an empty Athena project, I can load this file if I cut it down to 2 or 4 or 12 columns, with more columns making the plot window display respond slower and slower. With all 29 columns the program just hangs. Can you take some project with data in it, and load this raw data into that project without crashing? That might be a useful workaround for the moment. -Jason If so, you might temporarily get around the problem by loading data into On Mon, Aug 13, 2012 at 4:59 PM, BradleyW Miller < Miller.BradleyW@epamail.epa.gov> wrote:
New Demeter Athena 0.9.10 Old Athena 0.8.061
Matt I tried everything you suggested in addition I tried removing everything except the columns. Nothing worked.
Thanks for your time.
Respectfully, Bradley W. Miller, Ph.D. Post Doctoral Fellow Oak Ridge Institute for Science and Education U. S. Environmental Protection Agency National Risk Management Research Laboratory Land Remediation and Pollution Control Division 5995 Center Hill Avenue, Cincinnati, OH 45224-1702
Office: (513) 487-2889 Miller.BradleyW@epa.gov Fax: (513) 569-7879 www.epa.gov
www.tinyurl.com/bwmiller
The great tragedy of Science—the slaying of beautiful hypothesis by an ugly fact.— Thomas H. Huxley
Views or Opinions expressed in this email is solely representative of the sender and does not represents those of the EPA or any other agency.