On Thursday, February 21, 2013 09:05:51 AM Ivan Stijepovic wrote:
Just a thought and one question regarding "freeze" option in Athena. Would it be better to set rmax in Athena to some higher value in the first place, e.g. 7, and then use "freeze group" option? The error in Artemis would be avoided and one could still use "freeze". Does it sound right?
Hi Ivan, Your suggestion avoids Dev's immediate problem, but introduces two more problems. The best solution is for me to change the behavior of Artemis so that it turns off the "freeze" flag when data are imported from an Athena project file. The problems are (1) this just freezes the rmax value to a different number. One still will want to change that value in Artemis. (2) Rmax is used to compute Nidp (number if independent points). Set to 7, Nidp will be computed wrongly, as will all the statistical parameters. B -- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973 Homepage: http://xafs.org/BruceRavel Software: https://github.com/bruceravel