Re: [Ifeffit] Problem Importing CIF files into Larch

Hi Vincent, Yeah - we are using pymatgen to do the actual CIF parsing, and I think that part is working fine. Well, except that it isn't great at identifying equivalent positions and so tends to give at least 2x more sites than actually necessary. In itself, that isn't a huge problem. The problem that Amol (and, I'm guessing you saw too) was that structures generated by pymatgen or CrystalMaker, etc won't have some of the fields currently expected. I started with a restricted set from the AmMin Database, and was focused on searching through these, so just assumed that each structure would have a publication -- that is also true for structures from COD, but won't be true for structures from CrystalMaker or ShelXL. And right now, the CIF Browser wants to take any CIF you read in and add it to the database (so you'll have it next time). But, it should not assume the CIF file will have all that information.... That's all to say that I think this is fixable.... On Mon, Aug 16, 2021 at 3:31 PM Vincent Wu wrote:

Hello,

I've found that if I have cif files that don't work with Larch, I use Pymatgen to read the CIF and output a Pymatgen generated CIF, which would then work with Larch. I believe that Pymatgen cleans up cifs in a way, so that they become compatible.

Vincent

On Mon, Aug 16, 2021 at 1:22 PM Matt Newville wrote:

...

Hi Amol,

Sorry for the delay, I was offline most of last week. Thanks for posting these CIF files. I think these should be usable -- the basic "cif2feffinp()" function works on these to generate a valid Feff.inp, but the GUI CIF Browser is currently expecting additional fields such as publication information. I guess those fields should be optional. I think there is another issue with using multi-site CIF structures that I want to look into. So, I hope to get this fixed soon, but I also want to tackle a few other issues before posting a completely new version.

--Matt

On Tue, Aug 10, 2021 at 4:12 PM wrote:

...

Hi,

I hope you are doing well. I am writing regarding some issues that I am having with opening my CIF files in Larch. I have used these same CIF files in the past in Artemis to run feff calculations. When I open these files in the Larch open feff tab, it shows a dialog box saying that there is an error opening the CIF file. This is happening with all my CIF files and I am not sure why. I am attaching a couple of these CIF files. I would really appreciate some help on this.

Amol Agarwal

PhD Student

Materials Science & Engineering | Northwestern University

_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit

_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit

_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit

-- --Matt Newville <newville at cars.uchicago.edu> 630-327-7411