Ian (and anyone else interested), Could you go to http://bruceravel.github.io/demeter/#windows and try out pre-release #2 for 0.9.21? I think I have addressed all the problems you were running into with QFS paths -- I can read, fit, save, and re-import the project file you sent me and it behaves sensibly. You'll let me know if you agree. I have done nothing to address your 3rd and 4th points because I am not clear what you think the problem is. I think the program is behaving correctly on those points, but perhaps I don't understand the issue. B PS: Make sure to use the links that say "<< 64 bit installer >>" or "<< 32 bit installer >>". The link buttons in the side bar point at the 0.9.20 installer. On 10/27/2014 10:10 AM, Bruce Ravel wrote:
Ian,
I am starting a new thread for your email. It is only peripherally related to the problem discussed in the other thread.
The main problem was two mistakes in how a quick first shell path was brought back to life when importing the project file. I'll explain, although one of the problems is rather technical.
Mistake #1 is related to the option for auto-generating variables. That flag was not turned off, so the auto-generated parameters got regenerated, over writing the ones you chose. Yikes!
Mistake #2 involved an assumption about the order of entries in a hash data structure while bringing the QFS path back to life. That is extremely sloppy on my part because the order of hash entries is not predictable. This was leading to the intermittent aspects of the behavior.
Dear All,
Sorry for resurrecting this old thread but I've been experiencing a bug that produces very similar symptoms and that I guess may be related; but that won't be solved by Bruce's fix. Details are as follows:
Software: Demeter 0.9.18.2 and 0.9.20 x64 (possibly earlier releases too) on Windows 8.1 x64 (I've never observed this bug on Windows versions before 8, but I've been using Windows 8 as my main OS for a while now so that may be coincidental)
Steps to reproduce: I run a fitting project using quick first shell fits and save it. When I re-open the project around 80% of the time the problem occurs.
Symptoms: When I re-open the project around 80-90% of the time one or more of the following occurs:
- One of the quick shell paths completely loses all its information (including path information which isn't editable by the user, parameter info etc; see attached screenshot)
I believe that I have fixed this.
- Parameter info for one or more paths is reset to the default (i.e. if I've named a path delrauau it's renamed dr_ag_au_1)
Again, I believe that I have fixed this.
- In the GDS window starting values for parameters that have a non-zero starting value are set to their previously guessed value, rather than the starting value I set (ie. If I set ss as 0.003 and during the fit it is guessed to be 0.001 when I reopen the project the starting value will be set to 0.001) and "restrain" parameters are changed to "guess".
I have examined the history of your project. At no point is a fit saved with a restraint. The GDS windows is filled correctly according to the contents of your project file. Also, the initial guesses are all entered into the GDS window with the values I see in the history.
Are you saying that you have made a restraint, saved the project, then had Artemis fail to remember that you had made a restraint?
- Phase correct fitting boxes are unticked (sometimes in an "impossible fashion" where the "plot with phase correction" option is set but no paths have the "use path for phase corrected plotting" option set)
I don't understand how that can be a problem. The default is not to plot with phase correction. I don't save the state of that button in the project file in any case.
I need to do a bit more testing, hopefully I'll make a new trial release package for your to test before the end of the day.
B
Attachments:
Noinfo.png - screenshot of Artemis when path info is lost Reset.png - screenshot of Artemis when parameter names are reset Dartemis.log - Artemis log file when opening a project that has this problem Artemis.fpj - Artemis project file that displays these symptoms.
Please let me know if you need further info/files.
Thanks,
Ian
Ps: OK, things got weird while preparing this bug report: The file in question stopped opening at all - Artemis loaded and went through loading fit x, x+1 etc., once it finished (not exactly sure what stage) it just closed. And then, after several attempts, started working again, as if by magic, before I'd saved a log file.... If I can figure out how to reproduce this I'll send more info...
-- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Science Group at NSLS-II Building 535A Upton NY, 11973 Homepage: http://bruceravel.github.io/home/ Software: https://github.com/bruceravel Demeter: http://bruceravel.github.io/demeter/