I do not clearly understood what you mean. could you explain it more precisely? do you want to replace the x scale from energy to time? if you want only set the edge energy use E0 kicaj ________________________________ Od: ifeffit-bounces@millenia.cars.aps.anl.gov w imieniu Khalid, Syed Wysłano: Pn 2008-09-08 18:20 Do: ifeffit@millenia.cars.aps.anl.gov Temat: [Ifeffit] enrgy-axis-expansion Is it possible in Athena to change the y-axis (energy scale) at two different energy points of an EXAFS scan? I have a Ni foil spectrum as a function of time. The edge can be set at 8333.0 eV, and I want to to assign higher energy to a known feature in the Ni scan. Syed Khalid 725D, National Synchrotron Light Source Brookhaven National Laboratory Upton, NY 11973 Ph: 631-344-7496 FAX: 631-344-3238 e-mail: khalid@bnl.gov _______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit