Re: [Ifeffit] [IFEFFIT] question about chemically unordered systems

Dear Matt, dear community thank you for your fast reply! I am not sure, if I understand you correctly. I tried what you suggested, but the result is just the same. I will try to give some more insight: Our binary system is bcc (pm-3m), there is one atom on the position (0,0,0) and another one on the position of (0.5,0.5,0.5). After creation of the material, we have a chemically disordered state. Any of the two atoms can occupy any of the aforementioned positions. After heat treatment however, the material chemically orders itself and becomes CsCl structure. In theory, atom A will always be on the corner at (0,0,0), while atom B will always be in the centre of the cell at (0.5,0.5,0.5). Our problem is, we would like to distinguish between these two phases, because we possibly have mixtures of the ordered and disordered states. We already achieved the ordered state with atoms, because they are unique positions (Atom A at (0,0,0), atom B at (0.5,0.5,0.5). Unfortunately we are unsure how to model the disordered state. We would need the possibility to tell the programme, that the observed atom will always be A at (0,0,0), while the other atom has a possibility of 50% to be A and 50% to be B. For the programme it seems not to matter which of the positions our observed atom is at. Therefore the calculated spectra are the same. I hope I was able to give more insight into our problem. Thank you! Best Regards Falk Am Tue, 7 Aug 2012 09:20:15 -0500 schrieb Matt Newville :

Hi Falk,

On Tue, Aug 7, 2012 at 8:42 AM, Meutzner, Falk wrote:

...

Dear IFEFFIT Community,

is there a way to calculate the spectrum for chemically disordered systems? We have a simple binary bcc structure. It crystallises either in superstructure (CsCl) or chemically disordered (W type) with both atoms randomly taking part of either (0,0,0) or (0.5,0.5,0.5). It is easy to get the superstructured model for artemis, but we have no clue how to model the disordered system...

Thanks a lot for your help, we really appreciate it.

Best regards Falk

Feff generates the EXAFS contributions for an individual atom in a cluster of atoms. To model a range of local structures that an atomic species might have in a disordered (or even moderately complex ordered structure, such as two inequivalent sites in a unit cell), one has to do a calculation for each candidate environment for the absorbing species and average the results accordingly.

To model the disordered system, I think you would need to run one calculation with the central atom at the (0, 0, 0) site and one at the (1/2, 1/2, 1/2) site. You can then add the weighted contributions from the corresponding paths from each calculation. One of the things EXAFS might be able to distinguish (depending on the Z contrast of the atoms in your structure) is whether one site is preferred over another.

I hope that helps get you started. If not, perhaps a more concrete question would help.

--Matt _______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit