Hi Bruce,
Thanks for your email. Here is the thing. I checked all the data. It
shows big difference of edge step at some scans. Now I attach one scan
with this problem for you. Please take a look at it. The scan is CMC
file.(Column 8 should be i0 and Column 10 should be i2. Columns 25 to
32 are the individual elements.)
Thanks again.
Sincerely,
Shanshan Liu
BCPS Dept.
Illinois Institute of Technology
----- Original Message -----
From: Bruce Ravel
Hi Bruce,
I checked and it shows that all the values are the same in both
On Wednesday 12 December 2007 14:08:40 Shanshan Liu wrote: platforms. Hi Shanshan,
Sorry I never got back on this issue -- I was busy with beamtime.
I am not sure what else I can do to help you troubleshoot your problem. Without data or a project file and without any information about what Ifeffit commands were actually sent to Ifeffit, all I can do is acknowledge that the screenshots you sent do, indeed, indicate that your problem is real. Like I say all the time on this mailing list, if you do not provide me with enough information to replicate the problem on my own computers, I am unlikely to be able to solve it.
B
-- Bruce Ravel ------------------------------------ bravel@bnl.gov
National Institute of Standards and Technology Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2 Building 535A Upton NY, 11973
My homepage: http://xafs.org/BruceRavel EXAFS software: http://cars9.uchicago.edu/~ravel/software/exafs/
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit