Hi Scott,
I have attached 3 of the data files and the Zr foil ref scan (already
calibrated). I first import the reference Zr foil scan and then the 3 files.
The Numerator for the data is column 30 and i also import the ref channel
where the numerator is column 7. If i choose to set ref to standard values
(as you would expect that to work) it fails and makes processing difficult.
The only way round it i see is to import each data set individually and set
the element, edge and value of E0 manually (for the reference - the data is
read correctly) before then using the "align marked groups" function to
align all the data to the standard Zr foil i imported at the start.
Having played with the setting on the preprocess tab if you check the "align
to standard" radio button it aligns the data (not the reference channel)
despite the fact the "same element" radio is not checked - should the
preprocessing not apply to the reference channel (if present) before the
data channel?
As i say it is not a huge problem and i only report it in the interest of
bug removal.
Thanks,
Dan
--------------------------------------------------
From: "Scott Calvin"
Hi Dan,
Could you attach the data files you are trying to import? We can see if the problem is reproducible on our systems.
--Scott Calvin Sarah Lawrence College
On Sep 5, 2012, at 10:50 AM, Daniel Whittaker wrote:
Hello all,
I am having a small issue when importing multiple data sets into Athena all of which have a reference channel.
The issue i am experiencing is that when importing multiple data sets together they do not all import correctly. The first data set (of all selected) imports fine (The data is Np and the reference Zr foil) - it imports the reference file which can be aligned to the calibration Zr foil file. However, the remainder of the files do not work at all, the reference channel does not import correctly at all. I have tried (best as i can tell) all of the pre-process options to no avail. When i import them individually it works although I have to tell it what element the ref channel is and the edge and E0 (couldn't the edge and E0 be linked such that selection of one filled the other?) but this isn't too much of an issue. It is by no means a massive problem but i thought i would ask if there is a way around it or if it is a real bug? All other multiple data processing - such as "align marked groups" - works fine. Regards, Dan Whittaker
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit