Re: [Ifeffit] MacPorts now contains Demeter 0.9.22 (and requires Perl 5.22)

Hi Joe, Thanks for updating the package! I tried updating, first running "sudo port selfupdate" and then "sudo port update demeter-devel". I get the following error when I try the latter command: bash-3.2$ sudo port upgrade demeter-devel Password: ---> Computing dependencies for ifeffit ---> Verifying checksums for ifeffit Error: Checksum (rmd160) mismatch for 1.2.final.tar.gz Error: Checksum (sha256) mismatch for 1.2.final.tar.gz Error: org.macports.checksum for port ifeffit returned: Unable to verify file checksums Please see the log file for port ifeffit for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_ifeffit/ifeffit/main.log Error: Unable to upgrade port: 1 To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets bash-3.2$ I've attached the log file as well. Any suggestions as to what else I might try? Thank you, George On Tue, Aug 11, 2015 at 3:49 PM, Fowler, Joseph W. wrote:

Dear Bruce:

Wait a minute! In fact, I updated the Mac Ports package *demeter* within the last two weeks to use Demeter version 0.9.22. Mac users might want to use the latest version and should consider doing a "port self update && port upgrade demeter".

Users who installed the development version port called *demeter-devel* will also land on 0.9.22 if they upgrade to the latest.

Note that the latest Mac Ports version is known as 0.9.22_1, where the revision number _1 corresponds to the upgrade from Perl 5.16 to 5.22 (which the MacPorts team is pushing on). For many users, there will be numerous dependency upgrades when you upgrade to 0.9.22_1, but I found they took only a few minutes in my particular case. This change in Perl versions could conceivably cause problems, but I haven't heard of any.

Best wishes, Joe Fowler (MacPorts maintainer for demeter)

------------------------------ *From:* Bruce Ravel *Sent:* Tuesday, August 11, 2015 6:55 AM *To:* XAFS Analysis using Ifeffit *Subject:* Re: [Ifeffit] Energy shift after deglitch

I don't see the behavior you describe when I follow your recipe. Perhaps it got fixed when I fixed this fellow's issue...?

http://millenia.cars.aps.anl.gov/pipermail/ifeffit/2015-May/012496.html

Of course, the Mac package is a fair bit behind at this point.

B

On 08/06/2015 06:10 PM, George Sterbinsky wrote:

...

Hello,

I am writing to report a bug in Athena running on OSX 10.10.4. Here are the steps to reproduce the problem. I'm not sure that all steps are necessary.

1. Open Athena and import the attached project, which contains two groups that are both marked. 2. Change plot range to plot from -30 to 30 eV. 3. Select the "deglitch and truncate" window. 4. Select group "Ref data.merge". 5. In deglitch many points, set margin to 0.05, Emin to -24, and Emax to -20. 6. Click replot margins. 7. Click remove points. 8. Click return to main window. 9. Click the derivative check box to plot marked groups as normalized derivative. 10. Click mu(E) button to plot marked groups as derivative of mu(E).

When the last step is done the groups appear to shift with respect to each other. One can switch between Normalized and mu(E) and see the shift come and go.

Thank you, George

_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

-- Bruce Ravel ------------------------------------ bravel@bnl.gov

National Institute of Standards and Technology Synchrotron Science Group at NSLS-II Building 535A Upton NY, 11973

Homepage: http://bruceravel.github.io/home/ Software: https://github.com/bruceravel Demeter: http://bruceravel.github.io/demeter/

_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit