To save Bruce the trouble, I think I will reply. First, you must remember that the horae suite are written in perl and Tk and as such they run in compatibility libraries under windows and this can cause problems (and often does) so the problems may be unique to your own setup (e.g. a clean instal may help, but I am sure others will comment more). Second, your message is basically noise as far as figuring out what is going wrong, a necessary (but not necessarily sufficient!) minimum is including enough detail to reproduce the problem. To quote from Bruce (I copied his old message on the same topic of bug reports:) 1. If I cannot reproduce your problem, I cannot solve it. 2. Explain to me what actions you took leading up to the problem you are reporting. 3. Send me any information, trap files are certainly a good start, that will help me understand what went wrong. 4. Send me a project file so I can see the problem happen on one of my computers. 5. If I cannot reproduce your problem, I cannot solve it. I know I said that already, but it seems I cannot say it enough -- I still regularly get "bug reports" that are little more "It done got broke." Here again is the whole story on bug reports: http://leonardo.phys.washington.edu/~ravel/software/exafs/bugs.html Read the links in the "How to report bugs" box. They're there for a reason. On 2004/06/11, at 11:55, Ssk0016@aol.com wrote:
Hello All, I"m a graduate student and trying to use Athena and Artemis for EXAFS analysis.I just follow the steps ,as mentioned in the manual,to do Cu example.this is what I did. * First I opened the Chi file * Then I imported the Atoms input file,and typed all the informations and pressed "run atoms". * It gave me Feffinput.Then I pressed "run Feff".Then the bar at the bottom of the screen blinked and in very short time it asked "how many paths I want",and I clicked the button. ...It supossed to give the message screen with all the details and then all the paths should be displayed at "data & Paths".
But it didn't,insted the message screen was displayed with no messages.Also there was a warning at the bottom says "Message dumped to C:/program files/ifeffit/horae/stash/ARTEMIS.TRAP". So i went to file menu and clicked "import feff calculations" and import ARTEMIS.TRAP.then in the interpretation page ,there was a message screen saying "couldnot find feff.inp,files.dat,paths.dat".
I don't know how to solve this problem.Can anyone help me to overcome this? NOTE: I'm using windows XP.
thanks Poorani
' i opened th_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Dr. Paul Fons Senior Researcher National Institute for Advanced Industrial Science & Technology METI Center for Applied Near-Field Optics Research (CANFOR) AIST Central 4, Higashi 1-1-1 Tsukuba, Ibaraki JAPAN 305-8568 tel. +81-298-61-5636 fax. +81-298-61-2939 email: paul-fons@aist.go.jp The lines below are in a Japanese font 〒３０５−８５６８ 茨城県つくば市東１−１−1 つくば中央第４ 近接場光応用工学センター ポール・フォンス主任研究官