Dear all, Recently we've measured samples at the DUBBLE Beamline at ESRF for iron and molybdenum (K-edge). After measuring, the DUBBLE software generates a .dat file which must then be translated to other files (depending on the fact whether transmission or fluorescence is measured) using some script in linux. When we try to import some of these transformed files (for transmission measured) into Athena however, the program fails to subtract a background from mu(E), therefore no k and R-space plots are available (see project files MoPEL002 and MoPEL004, the original dat.sample files are included in the zip files). Other files however, work fine (both transmission and fluorescence measured ones). After analyzing the structure of the .dat files, it was discovered which columns are the Io an It data and the correct ln(Io/It) could be manually generated. This manual procedure yields data sets identical to the ones in the dat.sample files, we named them dat.good files. When importing these files into Athena, the background subtraction works fine. It is the exact same data however... Although the problem can be bypassed by processing the data manually, the fact that Athena processes some files correctly and others not seems very strange to us since they all come from the same beamline. We thought it would be interesting to let you all know. Thanks for your time and for making such wonderful software, Alexander Riskin -- Alexander Riskin Universiteit Hasselt IMO - Inorganic and Physical Chemistry Agoralaan – Building D BE-3590 Diepenbeek / Belgium tel. +32.(0)11.26.83.94 fax. +32.(0)11.26.83.23 email: alexander.riskin@uhasselt.be