Hi Chachi,
I am working on something very similar to your suggestion for the next release. Another option that is in recent versions of Artemis that may be helpful to you is the item in the File menu that says "Save current fit". The purpose of this is to save a project file with the current fitting model and *without* the history.
As for a reference, I prefer that people continue using the same reference as always -- the one from JSR.
I also want to mention that I am away from home for a while. I know there are some outstanding questions on the mailing list -- for example, the other day there was a problem with Athena's PCA implementation. I probably won't be able to address that until I return home late next week.
Cheers,
B
Bruce Ravel ------------------------------------ bravel@bnl.gov
National Institute of Standards and Technology
Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2
Building 535A
Upton NY, 11973
Homepage: http://xafs.org/BruceRavel
Software: https://github.com/bruceravel
________________________________________
From: ifeffit-bounces@millenia.cars.aps.anl.gov [ifeffit-bounces@millenia.cars.aps.anl.gov] on behalf of Chachi Rojas [crojasa@unmsm.edu.pe]
Sent: Monday, July 08, 2013 10:56 AM
To: XAFS Analysis using Ifeffit
Subject: Re: [Ifeffit] User interface question for Demeter
Hi Bruce,
That's exactly what I do, discard one by one, but here is the problem, that only mark a fit, it takes some time (very slow) opening up all the fit contents.
As I work with nanostructured systems, the fit is always done by attempting many different models.
Well, my suggestion would be (for the next release) add an option in preferences to enable or disable automatic saving, and in the log window a button to save (to artemis project - not to a file) of course, when it is acceptable.
One last question, what is the best reference of Demeter to cite in a publication.
Chachi
On Wed, Jul 3, 2013 at 4:23 PM, Bruce Ravel mailto:bravel@bnl.gov> wrote:
On 07/03/2013 03:03 PM, Chachi Rojas wrote:
I re-started use (D)Artemis last week, it is great work,
But, I have the same problem with data list and path list, each time I
open the project it change the order.
I've never seen this behavior. I'd need a clear example in order to
do anything about it.
And another point is about fit history, it is necessary save all old
fits?, because if you have many data and feff calculations it is large
file, Ok sometime is important for statistical report and I can discard
some fits, but into compressed fpj file continue that fit directory with
many files, So if you reopen project it is very slow each time you add
more fits and sometimes paths included in the fit is lost. It may be my
OS distribution or some configuration?
Exist the way to dis-enable the automatic save fits, only save if I
consider a good fit.
There's not, but each fit only occupies about 200k and mostly does not
get imported unless you explicitly look at it in the history dialog.
That said, I acknoweldge that this is the slowest part of opening a
project. I've spent a lot of time working on optimizing that, but I
could certainly stand to do some more.
In the history dialog, there is a way to discard fits one-by-one --
right click on an item in the list -- discard is one of the options.
Another option in that context menu is to "export" a fit. That will
write out a project with only that one in the history.
In any case, I will think about ways of giving you finer control over
history creation.
B
--
Bruce Ravel ------------------------------------ bravel@bnl.govmailto:bravel@bnl.gov
National Institute of Standards and Technology
Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2
Building 535A
Upton NY, 11973
Homepage: http://xafs.org/BruceRavel
Software: https://github.com/bruceravel
_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.govmailto:Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
