Works like a charm!
Thanks,
Ian
-----Original Message-----
From: Ifeffit [mailto:ifeffit-bounces@millenia.cars.aps.anl.gov] On Behalf Of Bruce Ravel
Sent: 27 January 2016 18:13
To: XAFS Analysis using Ifeffit
Having said that, I've downloaded and applied the patches from github and have found a slightly annoying behaviour. Everytime I use the the buttons under the plotlist (both the orange ones and the purple ones) the component lists reset.
i.e. I set up a sum with component 1 as, say, HAuCl4 standard and component 2 as, say, Au foil and plot it. I then plot a couple of datasets using the buttons on the RHS. At this point all the component lists reset themselve to blank. I can reselect the component from the dropdown easily enough, but this is annoying if I have several components set up with corresponding weightings in a summation.
Simple fix committed at https://github.com/bruceravel/demeter/commit/9fa28926e5bd119d8d6574afa03b579... Will be in the next release. (Also easy to apply by hand, if you are so motivated.) B -- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Science Group at NSLS-II Building 535A Upton NY, 11973 Homepage: http://bruceravel.github.io/home/ Software: https://github.com/bruceravel Demeter: http://bruceravel.github.io/demeter/ _______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit