Hi, the edge step should be less than 1; the edge step at white line should be not higher than 1.5 and die maximum absorption should not be higher than 2.7 (max. 3) (reason is the signal to noise ratio). The reason for limiting the edge jump are none linearities of your detector systems. So I would not use the data for further analysis. best regards Stefan -- Dr. Stefan Mangold Institut für Synchrotronstrahlung Forschungszentrum Karlsruhe Am 28.04.2008 um 18:27 schrieb LACHLAN MACLEAN:
Hi All
Long-term lurker, first time poster.
I've recently collected some EXAFS data with a large edge step (~3.4) and for some reason didn't pick up on it until it was too late. I've been told that ideally we would want an edge step of 1 and anything above ~1.5-2 is too high. I'm wondering if there is a way to salvage the dataset in order to compare it with EXAFS data that I collected from two other samples (all three are supposed to be synthetic goethite). The first two samples that I want to compare have edge steps of about 0.35.
I know Athena allows one to adjust the edge step but wonder how appropriate this is and how much change this would cause the EXAFS data? Trying to adjust the edge step from 3.4 down to ~1 or so seems to be quite a jump. I'm curious whether there is a way to salvage this data rather than wait until the next beamrun.
Any help would be appreciated.
Cheers Lachlan
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit