On Monday 19 December 2005 13:21, Victor Krayzman wrote:
Besides other codes I work with Athena and Artemis and I have some troubles with Artemis. (It runs under Windows 2000) Last time I read a data file, made two FEFF calculations, read one more data file and made three FEFF calculations for it. Then I saved project, quit Artemis, open it again and tried to read the saved project. I found only data files and two FEFF calculations for the first data set. FEFF calculations for the second set disappeared. I met the same situation some time ago. To fix the problem I had to reinstall the Artemis. But now I have got the same thing. Could you help me? I attached the saved project and the message in a window.
Hi Victor, You have uncovered a tricky little bug. The problem is with the string that you write in the tags column of the table of sites on the Atoms page. It turns out that the tag has to be a character string without spaces. However, Artemis does not check to verify that the tag in fact is acceptable. That check will be added in the next release. Until that fix gets made, the work-around is easy. Don't include spaces in the site tag. If you have already done so, it is possible to fix the problem by hand, but that requires a certain knowledge of the structure of the project file. If you have done so, you will probably have to just scrap the project and start over. For the time being, Victor, I have fixed your project file by hand and will mail it back to you personally. B -- Bruce Ravel ---------------------------------------------- bravel@anl.gov Molecular Environmental Science Group, Building 203, Room E-165 MRCAT, Sector 10, Advanced Photon Source, Building 433, Room B007 Argonne National Laboratory phone and voice mail: (1) 630 252 5033 Argonne IL 60439, USA fax: (1) 630 252 9793 My homepage: http://cars9.uchicago.edu/~ravel EXAFS software: http://cars9.uchicago.edu/~ravel/software/exafs/