This might help: https://doi.org/10.1107/S1600577514001283 Note that we measured a sequence of standards of known thickness and concentration /prior/ to the rest of the experiment, so the methodology in that paper might not be useful after the fact in the absence of that prep work. B On 02/20/2017 10:19 PM, pushkar shejwalkar wrote:
Dear All, First of all, is it possible to calculate the concentration of metal (loading, therefore) from just the edge jump? Is there a simpler equation like knowing the Flux values or some basic instrumental information we can calculate the concentration term using Io and It values of beamline (the simplest form of Beer-lambert law)? if so what formula should we use. I searched in the mailing list archive and have found one such archive but it discusses how to use calculation to find out how much sample would be needed to get the edge jump. I am rather interested in the reverse way. I have an experimental edge jump and want to calculate (if possible with as much accuracy as possible) the concentration of metal. I know with only edge jump it will be difficult and XRF will be a better and more reliable way. But for better understanding and cross checking between different samples, I wish to do such calculations. Can anyone guide me to the right direction and equations to do such calculations? Thank you all in advance Warmest regards Pushkar
-- Best Regards, Pushkar Shejwalkar. Post-doctoral -Researcher, Tokyo Engineering University, Tokyo-to Japan
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit
-- Bruce Ravel ------------------------------------ bravel@bnl.gov National Institute of Standards and Technology Synchrotron Science Group at NSLS-II Building 743, Room 114 Upton NY, 11973 Homepage: http://bruceravel.github.io/home/ Software: https://github.com/bruceravel Demeter: http://bruceravel.github.io/demeter/