[Ifeffit] Exporting fit from ARTEMIS_problem with k-weight

Natasa Diklic natasadkl at gmail.com
Fri Jun 19 11:44:14 CDT 2020

Hi Manju,

I had the same problem. The solution I found that worked for me was to use
"save next plot to a file" at the bottom of main artemis window instead of
exporting it from data window.

Hope this helps!



On Fri, 19 Jun 2020 at 18:20, Manju <manju.rao007 at gmail.com> wrote:

> Hello there
> I got an issue with k-weight of fit whileexporting the fit from ARTEMIS
> I fitted the data in k2, but it is exporting k3.
> I saved the fit at k2 weight and when I opened again, it was again set at
> k3.
> Is there any way I could choose the k-weight of my choice while exporting?
> Regards
> Manju
> Junior Research Fellow
> Department of Basic and Applied Sciences
> Punjabi University, Patiala- 147 002
> Punjab, India.
> _______________________________________________
> Ifeffit mailing list
> Ifeffit at millenia.cars.aps.anl.gov
> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
> Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20200619/225337da/attachment.html>

More information about the Ifeffit mailing list