[Ifeffit] o exafs

fred.mosselmans at diamond.ac.uk fred.mosselmans at diamond.ac.uk
Sat May 5 14:19:01 CDT 2018

Hi Julian,
First you'll do well to collect o k exafs to 500 evening, second exafs data is typically except on qexafs beamline collected in k space steps i.e. proportional to E squared spacing starting at the edge position. Hence 0.4 evening is a very small step for exafs NOT xanes.
If your beamline doesn't do k space scanning you can simulate it with several fixed eV step regions the step increasing as you get further from the edge. Also normally you would increase the time per point as you get further from the edge as the xafs signal compared to the background dies off
Best Regards

Sent from BlueMail<http://www.bluemail.me/r?b=12874>
On 5 May 2018, at 18:02, ifeffit-request at millenia.cars.aps.anl.gov<mailto:ifeffit-request at millenia.cars.aps.anl.gov> wrote:

Send Ifeffit mailing list submissions to
 ifeffit at millenia.cars.aps.anl.gov

To subscribe or unsubscribe via the World Wide Web, visit
or, via email, send a message with subject or body 'help' to
 ifeffit-request at millenia.cars.aps.anl.gov

You can reach the person managing the list at
 ifeffit-owner at millenia.cars.aps.anl.gov

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Ifeffit digest..."

Today's Topics:

   1. Energy Resolution (Julian Ehwald)


Message: 1
Date: Sat, 5 May 2018 12:01:26 +0200
From: "Julian Ehwald" <jehwald at gmail.com>
To: "'XAFS Analysis using Ifeffit'"
 <ifeffit at millenia.cars.aps.anl.gov>
Subject: [Ifeffit] Energy Resolution
Message-ID: <000a01d3e458$086925c0$193b7140$@gmail.com>
Content-Type: text/plain; charset="us-ascii"

Dear all,

This might be a very general question, but: I was wondering what energy
resolution you typically use at beamlines to obtain your raw data for exafs.
Since we have limited Beamtime only and other experiments that we want to
carry out, I was wondering what kind of resolution is common. Or
differently: Is it predictable what happens if I for example change from
steps of 0.2eV to 0.4eV? We want to obtain spectra up to 500eV above Oxygen
K, if that is of relevance.

Best, Julian

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20180505/40f0ebd6/attachment-0001.html>


Subject: Digest Footer


Ifeffit mailing list
Ifeffit at millenia.cars.aps.anl.gov
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit


End of Ifeffit Digest, Vol 183, Issue 5

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom

More information about the Ifeffit mailing list