[Ifeffit] FW: Data summation - missing groups

Godfrey, Ian i.godfrey at ucl.ac.uk
Mon Feb 1 06:00:46 CST 2016

Works like a charm!



-----Original Message-----
From: Ifeffit [mailto:ifeffit-bounces at millenia.cars.aps.anl.gov] On Behalf Of Bruce Ravel
Sent: 27 January 2016 18:13
To: XAFS Analysis using Ifeffit <ifeffit at millenia.cars.aps.anl.gov>
Subject: Re: [Ifeffit] FW: Data summation - missing groups

On 01/27/2016 11:24 AM, Godfrey, Ian wrote:
> Having said that, I've downloaded and applied the patches from github 
> and have found a slightly annoying behaviour. Everytime I use the the 
> buttons under the plotlist (both the orange ones and the purple ones) 
> the component lists reset.
> i.e. I set up a sum with component 1 as, say, HAuCl4 standard and 
> component 2 as, say, Au foil and plot it. I then plot a couple of 
> datasets using the buttons on the RHS. At this point all the component 
> lists reset themselve to blank. I can reselect the component from the 
> dropdown easily enough, but this is annoying if I have several 
> components set up with corresponding weightings in a summation.

Simple fix committed at


Will be in the next release.  (Also easy to apply by hand, if you are so


  Bruce Ravel  ------------------------------------ bravel at bnl.gov

  National Institute of Standards and Technology
  Synchrotron Science Group at NSLS-II
  Building 535A
  Upton NY, 11973

  Homepage:    http://bruceravel.github.io/home/
  Software:    https://github.com/bruceravel
  Demeter:     http://bruceravel.github.io/demeter/
Ifeffit mailing list
Ifeffit at millenia.cars.aps.anl.gov
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit

More information about the Ifeffit mailing list