[Ifeffit] artemis doesn't read user's epsilon(k)

[Bruce Ravel]

Victor,

You are correct.  That is shockingly broken.  I'll let you know when and 
how it gets fixed.

B

On 08/28/2016 04:20 AM, Victor Streltsov wrote:
> Hi Bruce,
>
>
>
> Epsilon(k) input “A user specified values for measurement uncertainty”
> in Artemis does not change the default value determined by Ifeffit.
>
> It assumes that input is a value of 0. I’ve tried the latest Artemis
> versions for Windows and Linus and they both behave the same.
>
>
>
> Best regards,
>
> Victor Streltsov
>
>
>
> _______________________________________________
> Ifeffit mailing list
> Ifeffit at millenia.cars.aps.anl.gov
> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
> Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit
>


-- 
  Bruce Ravel  ------------------------------------ bravel at bnl.gov

  National Institute of Standards and Technology
  Synchrotron Science Group at NSLS-II
  Building 743, Room 114
  Upton NY, 11973

  Homepage:    http://bruceravel.github.io/home/
  Software:    https://github.com/bruceravel
  Demeter:     http://bruceravel.github.io/demeter/