[Ifeffit] MacPorts now contains Demeter 0.9.22 (and requires Perl 5.22)

[George Sterbinsky]

Hi Joe,

Thanks for updating the package! I tried updating, first running "sudo port
selfupdate" and then "sudo port update demeter-devel". I get the following
error when I try the latter command:

bash-3.2$ sudo port upgrade demeter-devel
Password:
--->  Computing dependencies for ifeffit
--->  Verifying checksums for ifeffit
Error: Checksum (rmd160) mismatch for 1.2.final.tar.gz
Error: Checksum (sha256) mismatch for 1.2.final.tar.gz
Error: org.macports.checksum for port ifeffit returned: Unable to verify
file checksums
Please see the log file for port ifeffit for details:

/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_ifeffit/ifeffit/main.log
Error: Unable to upgrade port: 1
To report a bug, follow the instructions in the guide:
    http://guide.macports.org/#project.tickets
bash-3.2$

I've attached the log file as well. Any suggestions as to what else I might
try?

Thank you,
George



On Tue, Aug 11, 2015 at 3:49 PM, Fowler, Joseph W. <joe.fowler at nist.gov>
wrote:

> Dear Bruce:
>
>
> Wait a minute! In fact, I updated the Mac Ports package *demeter* within
> the last two weeks to use Demeter version 0.9.22. Mac users might want to
> use the latest version and should consider doing a "port self update &&
> port upgrade demeter".
>
> Users who installed the development version port called *demeter-devel* will
> also land on 0.9.22 if they upgrade to the latest.
>
> Note that the latest Mac Ports version is known as 0.9.22_1, where the
> revision number _1 corresponds to the upgrade from Perl 5.16 to 5.22 (which
> the MacPorts team is pushing on). For many users, there will be numerous
> dependency upgrades when you upgrade to 0.9.22_1, but I found they took
> only a few minutes in my particular case. This change in Perl versions
> could conceivably cause problems, but I haven't heard of any.
>
> Best wishes,
> Joe Fowler
> (MacPorts maintainer for demeter)
>
> ------------------------------
> *From:* Bruce Ravel <bravel at bnl.gov>
> *Sent:* Tuesday, August 11, 2015 6:55 AM
> *To:* XAFS Analysis using Ifeffit
> *Subject:* Re: [Ifeffit] Energy shift after deglitch
>
>
> I don't see the behavior you describe when I follow your recipe.
> Perhaps it got fixed when I fixed this fellow's issue...?
>
> http://millenia.cars.aps.anl.gov/pipermail/ifeffit/2015-May/012496.html
>
> Of course, the Mac package is a fair bit behind at this point.
>
> B
>
> On 08/06/2015 06:10 PM, George Sterbinsky wrote:
> > Hello,
> >
> > I am writing to report a bug in Athena running on OSX 10.10.4. Here are
> > the steps to reproduce the problem. I'm not sure that all steps are
> > necessary.
> >
> > 1. Open Athena and import the attached project, which contains two
> > groups that are both marked.
> > 2. Change plot range to plot from -30 to 30 eV.
> > 3. Select the "deglitch and truncate" window.
> > 4. Select group "Ref data.merge".
> > 5. In deglitch many points, set margin to 0.05, Emin to -24, and Emax to
> > -20.
> > 6. Click replot margins.
> > 7. Click remove points.
> > 8. Click return to main window.
> > 9. Click the derivative check box to plot marked groups as normalized
> > derivative.
> > 10. Click mu(E) button to plot marked groups as derivative of mu(E).
> >
> > When the last step is done the groups appear to shift with respect to
> > each other. One can switch between Normalized and mu(E) and see the
> > shift come and go.
> >
> > Thank you,
> > George
> >
> >
> >
> > _______________________________________________
> > Ifeffit mailing list
> > Ifeffit at millenia.cars.aps.anl.gov
> > http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
> >
>
>
> --
>   Bruce Ravel  ------------------------------------ bravel at bnl.gov
>
>   National Institute of Standards and Technology
>   Synchrotron Science Group at NSLS-II
>   Building 535A
>   Upton NY, 11973
>
>   Homepage:    http://bruceravel.github.io/home/
>   Software:    https://github.com/bruceravel
>   Demeter:     http://bruceravel.github.io/demeter/
>
>
> _______________________________________________
> Ifeffit mailing list
> Ifeffit at millenia.cars.aps.anl.gov
> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20150811/a77acb62/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: main.log
Type: application/octet-stream
Size: 2965 bytes
Desc: not available
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20150811/a77acb62/attachment.obj>