[Ifeffit] Warning "e0 is greater than 10"

[Ke Yuan]

Hello Feff community,

I am practicing on using Artemis to fit a UO2 XAFS data I measured. The
parameters I used can be found from the pic attached. The Artemis project
file is also attached.

I have been getting this "e0 greater than 10" warning on many of my
fittings. Will picking a slightly different E0 change the result much? Any
suggestions on how to improve this fitting?

Thanks!
Ke

-- 
Ke Yuan

PhD Candidate
Department of Earth and Environmental Sciences
1100 North University Ave
3021 C.C Little
University of Michigan, Ann Arbor
MI 48109-1005
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20141014/9cb927d1/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: UO2 fitting parameters.jpg
Type: image/jpeg
Size: 447482 bytes
Desc: not available
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20141014/9cb927d1/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: artemis_UO2 fitting practice.fpj
Type: application/octet-stream
Size: 1104784 bytes
Desc: not available
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20141014/9cb927d1/attachment.obj>