[Ifeffit] spline fitting

[Chris Patridge]

Move E0 past the white line and that should fix the problem. 

Chris

Sent from my iPhone

> On Aug 29, 2014, at 3:13 AM, Matthias Filez <Matthias.Filez at ugent.be> wrote:
> 
> Dear mailing list users,
>  
> I am trying to fit the spline background function in a proper way to a spectrum (Ga K edge, see attached).
> However, it doesn't seem to work out, but I don't see why.
>  
> I already tried the following:
> * Vary the Rbkg value
> * Change spline k-weight
> * Change k-range of spline fitting
> * Alter the strength of spline clamps
> ... and the combination of these effects.
>  
> Since there is a strong white line, I suspect this causes the spline misfit. The data quality is OK. 
> If you have any idea, please post it.
>  
> Thanks in advance,
> Matthias
> _____________________
> Matthias Filez
> Laboratory for Chemical Technology
> Department of Chemical Engineering
> Ghent University
>  
> Technologiepark 914, B-9052 Zwijnaarde, Belgium
> +32 (0)9 33 11721
> www.lct.ugent.be
> Disclaimer: http://helpdesk.UGent.be/e-maildisclaimer.php
> <r122043.prj>
> <r122043.dat>
> _______________________________________________
> Ifeffit mailing list
> Ifeffit at millenia.cars.aps.anl.gov
> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20140829/ad05da6b/attachment.html>