[Ifeffit] Rendering of windows in Artemis and transferring paths from feff calculation
GeorgeSterbinsky at u.northwestern.edu
Fri Apr 18 10:32:24 CDT 2014
Hi Bruce and Alison,
I am able to confirm the behavior reported by Alison (both bigger and
lesser problems) on OSX 10.8.5. Pressing the "transfer displayed path"
button causes Artemis to crash and the message below to print to the
2014-04-18 11:18:26.309 perl5.16[1309:707] *** WARNING: -[NSImage
compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:]
Can't locate object method "transfer" via package "Wx::Panel" at
line 1126, <F> line 9.
On Thu, Apr 17, 2014 at 3:30 PM, Bruce Ravel <bravel at bnl.gov> wrote:
> On 03/24/2014 03:21 PM, Alison Tebo wrote:
>> I am running Demeter 0.9.18 installed on a Mac 10.6.8 via the (very
>> helpful!) Macports port. I've had nearly no problems with processing my
>> data, but Artemis appears very strange. Most of the button can't be seen
>> and are black instead (I've attached a screenshot). The bigger problem
>> is that once I run a Feff calculation, I can't seem to transfer the
>> paths from the Feff Window into the Data Window (see second screenshot).
>> The program seems to think it's doing it--there are no error messages in
>> the log and it even makes the little graphic as it 'grabs' the path--but
>> it never transfers it over to the Data Window.
>> I have attached a project file where I get this error, the feff input
>> file that I run the calculation on, and two screenshots of what Artemis
>> looks like for me. I don't think the input and project file matter much
>> since this happens for me even with examples from the various courses
>> Bruce has given.
>> Any advice would be greatly appreciated.
> Hi Alison,
> First off, I apologize that it has taken me so long to respond to this.
> Busy time.
> I don't quite understand the bigger problem. This is certainly not a
> problem I have on other platforms. Do other Mac users observe the same
> As for the lesser problem, looking at the icons across the top in your
> screenshots, it would seem that you are using some kind of color theme that
> is different from a Mac out of the box. Is that right? If so, how does
> the software behave if you change the theme back to the default?
> Bruce Ravel ------------------------------------ bravel at bnl.gov
> National Institute of Standards and Technology
> Synchrotron Science Group at NSLS --- Beamlines U7A, X24A, X23A2
> Building 535A
> Upton NY, 11973
> Homepage: http://xafs.org/BruceRavel
> Software: https://github.com/bruceravel
> Ifeffit mailing list
> Ifeffit at millenia.cars.aps.anl.gov
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Ifeffit