[Ifeffit] Installation problems Ubuntu 12.04

[Bruce Ravel]

David,

I'm actually on vacation right now, so I won't be able to give your 
issue much attention for a while.

It's not clear to me why that prerequisite is failing.  I have installed 
it successfully on ubuntu machines many dozens of times.

That said, it seems that there is a problem installing SOAP::Lite.  Try

   sudo apt-get install libsoap-lite-perl

then try ./Build installdeps again.

No guarantees, but it's something to try.  Good luck.

B

On 09/05/2013 04:25 PM, David Eveborn wrote:
> Ivan,
>
> Many thanks for the suggestion! The second command was not successful
> (installation failed). However, the first command seem to work BUT
> $ perl ./Build.PL
> still reported "XMLRPC::Lite is not installed" and when I run
> $ ./Build installdeps
> I got similar output as before (see attached file). Anything more I can do?
>
> Regards
>
> David Eveborn
>
> JTI - Swedish Institute of Agricultural and Environmental Engineering
> Uppsala
> Sweden
>
>
> 2013/9/5 Ivan Stijepovic <ivan.stijepovic at gmail.com
> <mailto:ivan.stijepovic at gmail.com>>
>
>     Hi, David!
>
>     I think that you should install this module manually. You have two
>     options and both require to open terminal:
>
>     1. sudo apt-get install libnet-ssleay-perl
>
>     or
>
>     2. cpan -i Net::SSLeay
>
>     This should install missing perl module.
>
>
>     On Wed, Sep 4, 2013 at 4:31 PM, David Eveborn
>     <david.eveborn at gmail.com <mailto:david.eveborn at gmail.com>> wrote:
>
>         Hi!
>
>         I am trying to install the demeter package from sources as
>         described by Dave Huges
>         https://gist.github.com/waveform80/3959252. I am doing this on a
>         fresh install of ubuntu 12.04 (as a virtual machine if this
>         could have any effect). Most things turns out as expected but I
>         have encountered a problem. When I invoke the ./Build
>         installdeps one single dependency refuses to install because of
>         failing tests. The output from the terminal is attached in this
>         e-mail. If anyone could lead me in how to handle this I would be
>         very happy (I am not experienced in building from sources).
>
>         Kind Regads
>
>         David
>
>         _______________________________________________
>         Ifeffit mailing list
>         Ifeffit at millenia.cars.aps.anl.gov
>         <mailto:Ifeffit at millenia.cars.aps.anl.gov>
>         http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
>
>
>
>
>     --
>     Best wishes,
>     Dr. Ivan Stijepović
>
>     Department of Materials Engineering
>     Faculty of Technology
>     University of Novi Sad
>     Bul. cara Lazara 1
>     21000 Novi Sad
>     Serbia
>
>     tel: +381 21 485 3750 <tel:%2B381%2021%20485%203750>
>     fax: +381 21 450 413 <tel:%2B381%2021%20450%20413>
>     e-mail: ivan.stijepovic at gmail.com <mailto:ivan.stijepovic at gmail.com>
>     e-mail: ivan at tf.uns.ac.rs <mailto:ivan at tf.uns.ac.rs>
>
>     _______________________________________________
>     Ifeffit mailing list
>     Ifeffit at millenia.cars.aps.anl.gov
>     <mailto:Ifeffit at millenia.cars.aps.anl.gov>
>     http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
>
>
>
>
> _______________________________________________
> Ifeffit mailing list
> Ifeffit at millenia.cars.aps.anl.gov
> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
>


-- 
  Bruce Ravel  ------------------------------------ bravel at bnl.gov

  National Institute of Standards and Technology
  Synchrotron Science Group at NSLS --- Beamlines U7A, X24A, X23A2
  Building 535A
  Upton NY, 11973

  Homepage:    http://xafs.org/BruceRavel
  Software:    https://github.com/bruceravel