[Ifeffit] Fitting XANES spectrun with standards (Adrien Couet)
Bruce Ravel
bravel at bnl.gov
Fri Jun 29 15:04:31 CDT 2012
On Friday, June 29, 2012 03:56:24 PM adrien couet wrote:
> Going back to the original question, I did select 8 standards for both
> cases (single fit with "fit this group" and combination of fits with "fit
> all combinations"), which gives me 247 combinations (see Excel file
> attached).
> In the case of the single fit I get a R-factor of 2.0x10-3 whereas for the
> best fit from the combinations I got 1.8x10-3 (the weights of each
> standards are also different in both cases).
My answer is still the same.
It is quite possible that I am not understanding your explanation, but
it seems as though you are comparing the best fit from the
combinatorial sequence with the individual fit that uses all 8
standards.
B
--
Bruce Ravel ------------------------------------ bravel at bnl.gov
National Institute of Standards and Technology
Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2
Building 535A
Upton NY, 11973
Homepage: http://xafs.org/BruceRavel
Software: https://github.com/bruceravel
More information about the Ifeffit
mailing list