[Ifeffit] dathena cannot import data

[Huynh Khuong]

Dear Bruce,

Thank you for your kindness. Actually after sending the report to the
mailing list I came back to Ubuntu 12.04 from Ubuntu 12.10 (not because
of Demeter, but because I felt not so stable in 12.10). Now everything
works just fine. I installed Demeter following the guidance from Demeter
home page and from Dave Hughes.

The only notice is that maybe under Ubuntu, Demeter comes with the
default plot backend is PGPLOT, not GNUPLOT. In /home/.horae and in
plot.demeter_condf file in Demeter home (in my PC:
/home/khuong/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/configuration), 
the default value of plotwith is also pgplot. Changing them to gnuplot
and everything is OK.

This is my very first experience with Demeter and also with XAFS (I am
at the XAFS beamline of Spring8 now).  Anyway, thank you very much for
your kind help.

Best,

Khuong



On 12/06/2012 12:29 AM, Bruce Ravel wrote:
> Hi Khuong,
>
> Unfortunately, your post arrived n the mailing list a couple days
> after the big storm we had in my part of the world.  It was among the
> many such things that I was unable to address at the time.  I am now
> working my way through all the problems with and suggestions for my
> software -- I have finally arrived at this one.
>
> First off, I am sorry for the delay.  Such things happen.
>
> Secondly, I want to ask if you ever resolved your problem.  If so,
> could you say a few words about what you did to fix it.
>
> One of the kind folks on this mailing list wrote up this guide to
> installing Demeter:
>
>    https://gist.github.com/3959252
>
> You may want to take a look to see if perhaps you missed a step.
>
> My final question is whether you ran the "./Build test" step of
> installation.  If so, did the tests pass?  If the tests failed or if
> you did not run them, could you please do so and show me what gets
> written to the screen.
>
> The bottom line is that I am astonished that you had this problem.
> The data you included in your original email should have been imported
> without problem into Athena.  I do 95% or more of my development on
> Ubuntu computers, which is what makes your issues so surprising.
> Unfortunately, your email from a month ago did not have enough
> information for me to figure out the problem, whic is why I am
> interested in seeing the "./Build test" output.
>
> Again, sorry for the delay in responding.
>
> Cheers,
> B
>
> On Thursday, November 01, 2012 10:53:18 AM Huynh Khuong wrote:
>> Dear Everyone,
>>
>> I am a complete beginner to this field and to this software, so please
>> forgive me if I ask something stupid.
>>
>> I am using Ubuntu 12.10 64 bit. Demeter was built from source following
>> the guidance here:
>>
>> http://bruceravel.github.com/demeter/pods/installation.pod.html
>>
>> Ifeffit was also built from source before the installation of Demeter.
>>
>> I tried to run dathena from a terminal and import a data file download
>> from here:
>>
>> http://cars9.uchicago.edu/~ravel/software/doc/Athena/html/examples/data.html
>> <http://cars9.uchicago.edu/%7Eravel/software/doc/Athena/html/examples/data.
>> html>
>>
>>
>> Dathena said that the data file is not readable (see the attached
>> screenshot).  No output text appeared on the terminal.
>>
>> If I use the old version of Athena installed from the repository of
>> Ubuntu, the data file can be read easily.
>>
>> The data file is also attach.
>>
>> Could you please explain me about this issue ?
>>
>> Thank you very much in advance.
>>
>> Best,
>>
>> Khuong Huynh
>