[Ifeffit] XANES calculation

JeongEunSuk eunsuk1986 at hotmail.com
Sat Sep 4 23:52:38 CDT 2010


Thank Josha

I already read the letter which you introduced but I misunderstood.

can I ask a question?

Other progrems like FDMNES are possibe to fit to experiment data.

can I fit theory obtained from FEFF to experiment data like EXAFS?

I couldn't have heard that from other users and I also didn't find fitting parameters in FEFF.

 
 


Date: Sat, 4 Sep 2010 10:36:48 -0700
From: joshua.j.kas at gmail.com
To: ifeffit at millenia.cars.aps.anl.gov
Subject: Re: [Ifeffit] XANES calculation

Hi Jeong Eun Suk,
FEFF doesn't use basis functions. There is a truncation in angular momentum, but the XANES is calculated by first calculating the Green's function using multiple scattering theory. The Green's function is expanded in terms of an angular momentum basis about each atom, and radial solutions are numerical. Muffin tin potentials are used in FEFF8 and there is no option for full potential calculations at present. For more information on multiple scattering theory, 
see for example 

Multiple scattering in solids By Antonios Gonis, 


or
 

Theoretical approaches to x-ray absorption fine structure
J. J. Rehr and R. C. Albers
Rev. Mod. Phys. 72, 621 (2000) 


Cheers,
Josh
On Sat, Sep 4, 2010 at 10:00 AM, <ifeffit-request at millenia.cars.aps.anl.gov> wrote:

Send Ifeffit mailing list submissions to
       ifeffit at millenia.cars.aps.anl.gov

To subscribe or unsubscribe via the World Wide Web, visit
       http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
or, via email, send a message with subject or body 'help' to
       ifeffit-request at millenia.cars.aps.anl.gov

You can reach the person managing the list at
       ifeffit-owner at millenia.cars.aps.anl.gov

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Ifeffit digest..."


Today's Topics:

  1. iXAFS for Mac OS X (Matt Newville)
  2. Re: iXAFS for Mac OS X (Matt Newville)
  3. Re: iXAFS for Mac OS X (Jeff Terry)
  4. XANES calculation (JeongEunSuk)


----------------------------------------------------------------------

Message: 1
Date: Fri, 3 Sep 2010 22:08:57 -0500
From: Matt Newville <newville at cars.uchicago.edu>
To: XAFS Analysis using Ifeffit <ifeffit at millenia.cars.aps.anl.gov>
Subject: [Ifeffit] iXAFS for Mac OS X
Message-ID:
       <AANLkTinSvabP-Z5ARvxYO4Gh6xMTrF_sErC=ykxUFdcR at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Hi Folks,

With help from Ken McIvor and Jeff Terry,  I've built a new version of
iXAFS for Mac OS X.  This version should be considered experimental,
but for the brave and/or foolhardy please try it out and let us know
how it works. This version offers the latest versions of Athena,
Artemis, and Hephaestus, and the latest version of Ifeffit.    It is
meant to be universal (for x86_64, i386, and ppc), though I have not
fully tested this.

The download is fairly large (~74Mb), mostly because it includes a
full distribution of Perl built right in (so it doesn't interfere with
the system Perl).  It also provides a "complete" Unix shell-like
environment that can be used for those who need it.  For example, a
python module is included that can be installed.

The disk image is at
http://car9.uchicago.edu/~ifeffit/src/iXAFS3.0.dmg   This should be
able to be installed by dragging the iXAFS application to any folder.

To use the Unix shell, you'd put
  . /Applications/iXAFS.app/Contents/Resources/local/bin/iff_init.sh

in your .profile or from a bash Terminal command prompt (assuming you
installed to /Applications/).  To  install the Python module,  first
run iff_init.sh above, then
copy and unpack
/Applications/iXAFS.app/Contents/Resources/local/extras/IfeffitPython-2.0.0.tar.gz
and run 'python setup.py install'.

Again, this should be considered a beta release.  Please be willing to
look for and report problems.

Cheers,

--Matt


------------------------------

Message: 2
Date: Fri, 3 Sep 2010 22:11:36 -0500
From: Matt Newville <newville at cars.uchicago.edu>
To: XAFS Analysis using Ifeffit <ifeffit at millenia.cars.aps.anl.gov>
Subject: Re: [Ifeffit] iXAFS for Mac OS X
Message-ID:
       <AANLkTiku48seVpa5HTaW30_hiB7-Lap7u79zt0yFVQ3v at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Sorry for the typo.  The download is at
http://cars9.uchicago.edu/~ifeffit/src/iXAFS3.0.dmg

--Matt

On Fri, Sep 3, 2010 at 10:08 PM, Matt Newville
<newville at cars.uchicago.edu> wrote:
> Hi Folks,
>
> With help from Ken McIvor and Jeff Terry, ?I've built a new version of
> iXAFS for Mac OS X. ?This version should be considered experimental,
> but for the brave and/or foolhardy please try it out and let us know
> how it works. This version offers the latest versions of Athena,
> Artemis, and Hephaestus, and the latest version of Ifeffit. ? ?It is
> meant to be universal (for x86_64, i386, and ppc), though I have not
> fully tested this.
>
> The download is fairly large (~74Mb), mostly because it includes a
> full distribution of Perl built right in (so it doesn't interfere with
> the system Perl). ?It also provides a "complete" Unix shell-like
> environment that can be used for those who need it. ?For example, a
> python module is included that can be installed.
>
> The disk image is at
> http://car9.uchicago.edu/~ifeffit/src/iXAFS3.0.dmg ? This should be
> able to be installed by dragging the iXAFS application to any folder.
>
> To use the Unix shell, you'd put
> ? . /Applications/iXAFS.app/Contents/Resources/local/bin/iff_init.sh
>
> in your .profile or from a bash Terminal command prompt (assuming you
> installed to /Applications/). ?To ?install the Python module, ?first
> run iff_init.sh above, then
> copy and unpack
> /Applications/iXAFS.app/Contents/Resources/local/extras/IfeffitPython-2.0.0.tar.gz
> and run 'python setup.py install'.
>
> Again, this should be considered a beta release. ?Please be willing to
> look for and report problems.
>
> Cheers,
>
> --Matt
>



------------------------------

Message: 3
Date: Fri, 3 Sep 2010 22:38:23 -0500
From: Jeff Terry <terryj at iit.edu>
To: XAFS Analysis using Ifeffit <ifeffit at millenia.cars.aps.anl.gov>
Subject: Re: [Ifeffit] iXAFS for Mac OS X
Message-ID: <06727371-5AD2-401E-9EEF-0D981144D0E8 at iit.edu>
Content-Type: text/plain; charset=us-ascii

Hi All,

If you have been using the iXAFS Shell for command line access, note that
it is currently not working in this version.

Jeff

On Sep 3, 2010, at 10:08 PM, Matt Newville wrote:

> Hi Folks,
>
> With help from Ken McIvor and Jeff Terry,  I've built a new version of
> iXAFS for Mac OS X.  This version should be considered experimental,
> but for the brave and/or foolhardy please try it out and let us know
> how it works. This version offers the latest versions of Athena,
> Artemis, and Hephaestus, and the latest version of Ifeffit.    It is
> meant to be universal (for x86_64, i386, and ppc), though I have not
> fully tested this.
>
> The download is fairly large (~74Mb), mostly because it includes a
> full distribution of Perl built right in (so it doesn't interfere with
> the system Perl).  It also provides a "complete" Unix shell-like
> environment that can be used for those who need it.  For example, a
> python module is included that can be installed.
>
> The disk image is at
> http://car9.uchicago.edu/~ifeffit/src/iXAFS3.0.dmg   This should be
> able to be installed by dragging the iXAFS application to any folder.
>
> To use the Unix shell, you'd put
>   . /Applications/iXAFS.app/Contents/Resources/local/bin/iff_init.sh
>
> in your .profile or from a bash Terminal command prompt (assuming you
> installed to /Applications/).  To  install the Python module,  first
> run iff_init.sh above, then
> copy and unpack
> /Applications/iXAFS.app/Contents/Resources/local/extras/IfeffitPython-2.0.0.tar.gz
> and run 'python setup.py install'.
>
> Again, this should be considered a beta release.  Please be willing to
> look for and report problems.
>
> Cheers,
>
> --Matt
> _______________________________________________
> Ifeffit mailing list
> Ifeffit at millenia.cars.aps.anl.gov
> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit




------------------------------

Message: 4
Date: Sat, 4 Sep 2010 13:03:21 +0900
From: JeongEunSuk <eunsuk1986 at hotmail.com>
To: ifeffit <ifeffit at millenia.cars.aps.anl.gov>
Subject: [Ifeffit] XANES calculation
Message-ID: <BLU151-w31DB451074575B1BBF5E5EDA8E0 at phx.gbl>
Content-Type: text/plain; charset="ks_c_5601-1987"


Hi all

I calculated XANES by using FEFF8.0.

The manuel of FEFF8.0 demonstrates that basis functions of angular momentum in each atom is used to calculate SCF potential and FMS.

I know some codes use special basis functions of angular momentum like the set of Slater-Type Orbital, contracted Gaussian-type function to describe molecule or solid .

Does anybody know what kinds of basis function is used in FEFF8.0 to calculate SCF and FMS?

and how can I know the contribution of each basis function?

Finally, I read FEFF8.0 uses overlapped sherical muffin-tin(MT) to calculate XANES.

Is the non-muffin tin calculation impossible In FEFF8.0?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20100904/8a5af709/attachment.html>

------------------------------

_______________________________________________
Ifeffit mailing list
Ifeffit at millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit


End of Ifeffit Digest, Vol 91, Issue 2
**************************************


_______________________________________________ Ifeffit mailing list Ifeffit at millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20100905/9a51dfa2/attachment.html>


More information about the Ifeffit mailing list