[Ifeffit] Transmission EXAFS sample

[Scott Calvin]

On Nov 22, 2010, at 7:09 AM, Jatinkumar Rana wrote:
>>
> Hi Scott,
>
> Sorry for mixing up the things.
>
> For the case, when i have very limited amount of sample that i can not
> cover 1sq.cm area, you, Matt and others have given very very clear
> explanation about possible solutions and the probable effects on data
> quality. I am really very thankful to all of you for sharing your
> experience and expertise.
>
> My last post was with reference to the case when i have enough powders
> (i.e., reference oxide compounds). It is just to be ensured that i am
> doing things 100% exactly in a same way it has to be done.
>
> With best regards,
> Jatin
>
> --
> Jatinkumar Rana
>

Yes, Jatin, the procedure you described is fine. There is no "right"  
way to make samples, although there are many wrong ways.

--Scott Calvin
Faculty at Sarah Lawrence College
Currently on sabbatical at Stanford Synchrotron Radiation Laboratory
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20101122/12693d50/attachment.html>