[Ifeffit] ATHENA: \\\"you have not used any memory yet\\\"
gervais.claire at gmail.com
Mon Jul 19 02:24:06 CDT 2010
Thanks for your help, I indeed tried what you have suggested but
unfortunately without success.
Otherwise, I have tried to update ubuntu (to version 10.04 Lucid), but
it didn't help. I have also tried to install it on another 64bit
computer and it worked without any problem. So could it come from the
I feel stuck for the moment, and any new idea is welcome!
On Thu, Jul 15, 2010 at 10:36 AM, Price S.W.T. <S.W.T.Price at soton.ac.uk> wrote:
> Hi Claire,
> Am not sure if there's something else happening with your install, but when I go to load a data file, until I hit ok to load it, Athena displays the "you have not used any memory yet" message along the bottom as no file is yet loaded (perhaps stating the obvious!). I found on an old pc I used, the resolution was not high enough to display the ok button, but hitting return when the columns loaded did the job anyway.
> If you have been clicking on lots of other buttons in the data column window, keep hitting tab until the "clear reference channels" button is selected, hit it once more to then select the ok button (which you can't see) and then hit return. Hopefully your file will load!
> Of course, if there is something else the problem with your install this won't work.
> Hope it helps,
> Stephen Price
> Russell Group
> University of Southampton
> SO17 1BJ
> Ext: 24104
> Tel: 02380 594104
> From: ifeffit-bounces at millenia.cars.aps.anl.gov [ifeffit-bounces at millenia.cars.aps.anl.gov] On Behalf Of Claire Gervais [gervais.claire at gmail.com]
> Sent: 15 July 2010 07:57
> To: bravel at bnl.gov; XAFS Analysis using Ifeffit
> Subject: Re: [Ifeffit] ATHENA: \\\"you have not used any memory yet\\\"
> Hi Bruce,
> Here are some snapshots of my screen. As you may see, no error
> messages in the terminal and no OK button. The snapshots can be a
> little bit misleading because the cursor is in fact running (little
> wheel rolling and rolling on).
> Everything is gray and I cannot do anything else than closing the
> "data columns" window, which allows me to take control over, but
> without any file loaded.
> PS: Don't pay attention to the quality of the data, they are ugly. :-)
> On Wed, Jul 14, 2010 at 10:53 PM, Bruce Ravel <bravel at bnl.gov> wrote:
>> Can you take a screenshot and post that? I'd like to see what you are talking
>> Also, are any error messages written to the screen when you start Athena from
>> a terminal window?
>> On Wednesday, July 14, 2010 04:20:09 pm Claire Gervais wrote:
>>> You are right, this is exactly by googling that I have found that I
>>> was not alone to have this problem!
>>> I did change the fonts to have all windows entirely visible, but it
>>> did not improve. Still stuck with no OK in view. Indeed, it seems that
>>> the application waits for me.
>>> I am in Gnome, but I don't think it's the point, otherwise it would
>>> work under Windows in Virtualbox, no...? I am not an expert in GUI
>>> > Claire,
>>> > Please use the mailing list. That way, others can find solutions to
>>> > problems by doing a google search.
>>> > Is your problem related to question 13 at
>>> > http://cars9.uchicago.edu/ifeffit/FAQ/HoraeQuestions
>>> > Are you a KDE user? The "everything is grey" could be a kwin visual cue
>>> > that the application is waiting for input that you cannot find because
>>> > the column selection dialog is off the bottom of the screen.
>>> > B
>>> Ifeffit mailing list
>>> Ifeffit at millenia.cars.aps.anl.gov
>> Bruce Ravel ------------------------------------ bravel at bnl.gov
>> National Institute of Standards and Technology
>> Synchrotron Methods Group at NSLS --- Beamlines U7A, X24A, X23A2
>> Building 535A
>> Upton NY, 11973
>> My homepage: http://xafs.org/BruceRavel
>> EXAFS software: http://cars9.uchicago.edu/~ravel/software/exafs/
>> Ifeffit mailing list
>> Ifeffit at millenia.cars.aps.anl.gov
> Ifeffit mailing list
> Ifeffit at millenia.cars.aps.anl.gov
More information about the Ifeffit