[Ifeffit] modeling anti-site disorder

Frenkel, Anatoly frenkel at bnl.gov
Sun Nov 8 11:15:21 CST 2009

I would make a feff.inp file corresponding to the Co as a central atom in CoGa in its original CsCl structure. Then, I would substitute all Ga atoms by Co (the two sites are crystallographically equivalent in the bcc lattice, and there is no need to do it separately for Cs and Cl sites). That would give me Co-Co contributions for all single scattering, and Co-Co-Co...-Co contributions for all multiple-scattering paths. 
Then, I would do the same by making a feff.inp file for Ga as an absorber in its CsCl structure. Then, again, substitute all Co for Ga and create Ga-Ga and Ga-Ga-Ga...--Ga contributions.
If you REALLY want to include multiple-scattering contributions of collenear paths (going from the corner through the body center through the opposite corner along the cube diagonal) you would have to also generate mixed multiple-scattering paths by leaving one and/or two shells around Co(Ga) un-substituted in such models. That would give you Co-Ga-Ga, Co-Ga-Co, etc. linkages and their corresponding double and triple scattering collinear paths.
In short, it is just to make a number of models and save the resulting feffxxxx.dat paths on your disk for each of them, and make a table for yourself, which one corresponds to what linkage.
Then, you can add them all together in your fitting model and vary their mixing fractions. For example, if you want to fit the first shell only, you should fit it as: x*chi(Co-Co) + (1-x) chi(Co-Ga) for Co edge. It is of course best to do it by fitting Co and Ga edge concurrently, within the same run of your fitting program, by imposing multiple constratints on your Co-Ga distances, mixing fractions and debye-waller factors.
There are large number of papers describing multiple data set (multiple edge) fitting schemes in alloys which use this very simple method.


From: ifeffit-bounces at millenia.cars.aps.anl.gov on behalf of Shashwat
Sent: Fri 11/6/2009 9:37 PM
To: ifeffit at millenia.cars.aps.anl.gov
Subject: [Ifeffit] modeling anti-site disorder

Dear All,
I am studying the local disorder caused in CoGa alloy (B2: CsCl structure) due to ball-milling; it is expected that Ga atoms substitute most of the Co atoms in the Co sublattice after prolonged milling. In order to model this "anti-site" disorder (occupation of Ga atoms on the Co sites) in ATOMS, I am considering to change the occupancies at the corresponding sites as given below:
Before ball-milling:
site a: occupancy of Ga = 1
site b: occupancy of Co = 1
(standard .cif data)
After ball-milling (assuming 80% anti-site concentration):
site a: occupancy of Ga = 0.2 (plus compensating vacancies)
site b: occupancy of Co = 0.2
site b: occupancy of Ga = 0.8
Could anyone suggest if this approach is reasonable. 
Many thanks ...
-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 6090 bytes
Desc: not available
URL: <http://millenia.cars.aps.anl.gov/pipermail/ifeffit/attachments/20091108/57a7beb8/attachment.bin>

More information about the Ifeffit mailing list