[Ifeffit] Is artemis running on G5 Mac,

[POGER David 202545]

Hello
Thank you very much for your help Matt. Your advice was quite obvious in
fact but I followed it to use horae_update properly. Thanks to that, I could
see what was my first problem. I had an error about Aquaterm (the
installation script couldn't find an Aquaterm library file
(aquaterm.1.0.0.dylib I believe). So, I re-installed Aquaterm (the latest
version found on SourceForge). And then, the installation was perfect,
without any error anymore.
And, here is now my second problem. When I open a project file (a '.chi'
file) in Artemis, the program takes about 5s to try to open it (with the
comment 'plotting in r space' at the bottom of the window), and then crashes
down...
I'm really sorry!
Any other help or any idea?

Thank you

David

  > -----Message d'origine-----
  > De : ifeffit-bounces at millenia.cars.aps.anl.gov [mailto:ifeffit-
  > bounces at millenia.cars.aps.anl.gov] De la part de Matt Newville
  > Envoyé : jeudi 14 octobre 2004 23:54
  > À : XAFS Analysis using Ifeffit
  > Objet : Re: RE : [Ifeffit] Is artemis running on G5 Mac,
  > 
  > 
  > On Thu, 14 Oct 2004, POGER David 202545 wrote:
  > 
  > > I fear it doesn't work for me. I have untared the Horae-045.tar
  > > file in the Ifeffit directory. And when I type 'perl
  > > Makefile.PL', the installation script crashes and says 'Could
  > > not open /config/Config.mak file for reading'. The Greek gods
  > > may not be with me! I'll wait for the next tarball... Thanks a
  > > lot in adavance!
  > 
  > This is probably still an issue with permissions, but I'm not sure
  > what you did exactly. It sounds like you tried to run horae_update
  > in the Applications/Ifeffit directory.  If so, this probably won't
  > work, as you probably do NOT have write permissions to the
  > /Applications/Ifeffit directory, and horae_update creates a
  > folder (horae-045) to build the code it will install.
  > 
  > Let me be more specific.  Sorry if most of this is obvious!
  >   1. Open a Terminal
  >   2. move to your home directory: Type 'cd'.
  >   3. run horae_update with permission to write to the
  >      /Library/Perl and /Applications/Ifeffit.  Type
  >      'sudo horae_update'.  When prompted for a password,
  >      type the password for your user account (that is,
  >      the same one you logged in as).
  > 
  >   4. If you get a message that says 'command not found', then
  >      read the message.
  >      a) if the message begins 'bash: ... command not found'
  >         then type '. /Applications/Ifeffit/bin/iff_init.sh'
  >         Yes, that's a '.' followed by a space.
  >      b) if the message begins 'tcsh: ... command not found'
  >         then type 'source /Applications/Ifeffit/bin/iff_init.csh'
  > 
  >      Then do 'sudo horae_udate' again.
  > 
  > If you already have the horae-045.tar.gz file, 'sudo horae_update'
  > is exactly the same as:
  >     tar xvzf horae-045.tar.gz
  >     cd horae-045
  >     perl Makefile.PL
  >     sudo make install
  > 
  > Once the installation is successful, you can remove the
  > 'horae-045' folder.
  > 
  > --Matt
  > 
  > 
  > 
  > _______________________________________________
  > Ifeffit mailing list
  > Ifeffit at millenia.cars.aps.anl.gov
  > http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit