Demeter on Mac OS X via Macports
Hello Mac users, I finally have launched a Mac OS X version of Demeter 0.9.18.2 on Macports. I have not tested it very much because I’m not actually a Demeter user. It builds, launches and opens some example data but beyond that, it is untested. If the Mac version interests you, fire up your Terminal and follow these instructions: 1. *Carefully* follow the steps to install Macports. http://www.macports.org/install.php 2. Open a new Terminal window and type the following. It will take a while depending on your computer and network speed. sudo port install demeter 3. When it is done, launch Athena by typing the following in Terminal. Note: Make sure you are in a directory you have write permission to (like your home directory) because it creates hidden log files at launch time. athena It is a known issue that artemis and hephaestus do not launch right now, but Bruce is working on a fix that will be added soon. I'm not going to have time to debug people's Macports issues when installing Demeter with Macports, but tech support is available on the Macports Users mailing list [1]. You should not need any help installing if you correctly follow the intructions. Please let Bruce and I know if it works for you or not after you have it installed. I have only tested on OS X Mavericks and Mountain Lion so far. Keep in mind that this is the first working release candidate of Demeter on Mac OS X, so problems are going to be expected. Cheers! Frank [1] https://lists.macosforge.org/mailman/listinfo/macports-users
Hi Frank,
I installed Athena on OSX 10.8.5 using Macports. The error given below
prints to the terminal when I run Athena, and Athena does not generate any
plots. If there is any further information I can provide that would be
helpful, let me know.
Graphics::GnuplotIF : cannot find environment variable DISPLAY
Best,
George
On Fri, Jan 24, 2014 at 3:22 PM, Schima, Frank
Hello Mac users,
I finally have launched a Mac OS X version of Demeter 0.9.18.2 on Macports. I have not tested it very much because I’m not actually a Demeter user. It builds, launches and opens some example data but beyond that, it is untested. If the Mac version interests you, fire up your Terminal and follow these instructions:
1. *Carefully* follow the steps to install Macports. < http://www.macports.org/install.php> 2. Open a new Terminal window and type the following. It will take a while depending on your computer and network speed.
sudo port install demeter
3. When it is done, launch Athena by typing the following in Terminal. Note: Make sure you are in a directory you have write permission to (like your home directory) because it creates hidden log files at launch time.
athena
It is a known issue that artemis and hephaestus do not launch right now, but Bruce is working on a fix that will be added soon. I'm not going to have time to debug people's Macports issues when installing Demeter with Macports, but tech support is available on the Macports Users mailing list [1]. You should not need any help installing if you correctly follow the intructions. Please let Bruce and I know if it works for you or not after you have it installed. I have only tested on OS X Mavericks and Mountain Lion so far. Keep in mind that this is the first working release candidate of Demeter on Mac OS X, so problems are going to be expected.
Cheers! Frank
[1] https://lists.macosforge.org/mailman/listinfo/macports-users
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Hi George,
This is a GUESS as I have not installed athena from macports.
I can't be sure as I don't know if that version of Athena uses X11 but I imagine that it does.
Try typing echo $DISPLAY in a terminal window and see if you get a result. If you don't then you may not have X11installed.
You can download X11 at http://xquartz.macosforge.org/trac
Jeff
On Jan 25, 2014, at 8:07 AM, George Sterbinsky
Hi Frank,
I installed Athena on OSX 10.8.5 using Macports. The error given below prints to the terminal when I run Athena, and Athena does not generate any plots. If there is any further information I can provide that would be helpful, let me know.
Graphics::GnuplotIF : cannot find environment variable DISPLAY
Best, George
On Fri, Jan 24, 2014 at 3:22 PM, Schima, Frank
wrote: Hello Mac users, I finally have launched a Mac OS X version of Demeter 0.9.18.2 on Macports. I have not tested it very much because I’m not actually a Demeter user. It builds, launches and opens some example data but beyond that, it is untested. If the Mac version interests you, fire up your Terminal and follow these instructions:
1. *Carefully* follow the steps to install Macports. http://www.macports.org/install.php 2. Open a new Terminal window and type the following. It will take a while depending on your computer and network speed.
sudo port install demeter
3. When it is done, launch Athena by typing the following in Terminal. Note: Make sure you are in a directory you have write permission to (like your home directory) because it creates hidden log files at launch time.
athena
It is a known issue that artemis and hephaestus do not launch right now, but Bruce is working on a fix that will be added soon. I'm not going to have time to debug people's Macports issues when installing Demeter with Macports, but tech support is available on the Macports Users mailing list [1]. You should not need any help installing if you correctly follow the intructions. Please let Bruce and I know if it works for you or not after you have it installed. I have only tested on OS X Mavericks and Mountain Lion so far. Keep in mind that this is the first working release candidate of Demeter on Mac OS X, so problems are going to be expected.
Cheers! Frank
[1] https://lists.macosforge.org/mailman/listinfo/macports-users
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Hi Jeff,
That fixed the problem. Thanks for your help.
Best,
George
On Sat, Jan 25, 2014 at 3:35 PM, Jeff Terry
Hi George,
This is a GUESS as I have not installed athena from macports.
I can't be sure as I don't know if that version of Athena uses X11 but I imagine that it does.
Try typing echo $DISPLAY in a terminal window and see if you get a result. If you don't then you may not have X11installed.
You can download X11 at http://xquartz.macosforge.org/trac
Jeff
On Jan 25, 2014, at 8:07 AM, George Sterbinsky < GeorgeSterbinsky@u.northwestern.edu> wrote:
Hi Frank,
I installed Athena on OSX 10.8.5 using Macports. The error given below prints to the terminal when I run Athena, and Athena does not generate any plots. If there is any further information I can provide that would be helpful, let me know.
Graphics::GnuplotIF : cannot find environment variable DISPLAY
Best, George
On Fri, Jan 24, 2014 at 3:22 PM, Schima, Frank
wrote: Hello Mac users,
I finally have launched a Mac OS X version of Demeter 0.9.18.2 on Macports. I have not tested it very much because I’m not actually a Demeter user. It builds, launches and opens some example data but beyond that, it is untested. If the Mac version interests you, fire up your Terminal and follow these instructions:
1. *Carefully* follow the steps to install Macports. < http://www.macports.org/install.php> 2. Open a new Terminal window and type the following. It will take a while depending on your computer and network speed.
sudo port install demeter
3. When it is done, launch Athena by typing the following in Terminal. Note: Make sure you are in a directory you have write permission to (like your home directory) because it creates hidden log files at launch time.
athena
It is a known issue that artemis and hephaestus do not launch right now, but Bruce is working on a fix that will be added soon. I'm not going to have time to debug people's Macports issues when installing Demeter with Macports, but tech support is available on the Macports Users mailing list [1]. You should not need any help installing if you correctly follow the intructions. Please let Bruce and I know if it works for you or not after you have it installed. I have only tested on OS X Mavericks and Mountain Lion so far. Keep in mind that this is the first working release candidate of Demeter on Mac OS X, so problems are going to be expected.
Cheers! Frank
[1] https://lists.macosforge.org/mailman/listinfo/macports-users
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Glad to hear it. Jeff Sent from my iPhone
On Jan 26, 2014, at 7:49 PM, George Sterbinsky
wrote: Hi Jeff,
That fixed the problem. Thanks for your help.
Best, George
On Sat, Jan 25, 2014 at 3:35 PM, Jeff Terry
wrote: Hi George, This is a GUESS as I have not installed athena from macports.
I can't be sure as I don't know if that version of Athena uses X11 but I imagine that it does.
Try typing echo $DISPLAY in a terminal window and see if you get a result. If you don't then you may not have X11installed.
You can download X11 at http://xquartz.macosforge.org/trac
Jeff
On Jan 25, 2014, at 8:07 AM, George Sterbinsky
wrote: Hi Frank,
I installed Athena on OSX 10.8.5 using Macports. The error given below prints to the terminal when I run Athena, and Athena does not generate any plots. If there is any further information I can provide that would be helpful, let me know.
Graphics::GnuplotIF : cannot find environment variable DISPLAY
Best, George
On Fri, Jan 24, 2014 at 3:22 PM, Schima, Frank
wrote: Hello Mac users, I finally have launched a Mac OS X version of Demeter 0.9.18.2 on Macports. I have not tested it very much because I’m not actually a Demeter user. It builds, launches and opens some example data but beyond that, it is untested. If the Mac version interests you, fire up your Terminal and follow these instructions:
1. *Carefully* follow the steps to install Macports. http://www.macports.org/install.php 2. Open a new Terminal window and type the following. It will take a while depending on your computer and network speed.
sudo port install demeter
3. When it is done, launch Athena by typing the following in Terminal. Note: Make sure you are in a directory you have write permission to (like your home directory) because it creates hidden log files at launch time.
athena
It is a known issue that artemis and hephaestus do not launch right now, but Bruce is working on a fix that will be added soon. I'm not going to have time to debug people's Macports issues when installing Demeter with Macports, but tech support is available on the Macports Users mailing list [1]. You should not need any help installing if you correctly follow the intructions. Please let Bruce and I know if it works for you or not after you have it installed. I have only tested on OS X Mavericks and Mountain Lion so far. Keep in mind that this is the first working release candidate of Demeter on Mac OS X, so problems are going to be expected.
Cheers! Frank
[1] https://lists.macosforge.org/mailman/listinfo/macports-users
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Hey all,
Thanks for this feedback. X11 can also be installed directly through Macports. The port is called xorg-server. So here is the modified command to install Demeter with X11. Follow this with a logout and login.
sudo port install xorg-server demeter
Yes, XQuartz will work too. The Macports version will generally be newer because the developer at Apple responsible for XQuartz is the same person that keeps it updated at Macports.
Cheers!
Frank
On Jan 26, 2014, at 7:10 PM, Jeff Terry
participants (3)
-
George Sterbinsky
-
Jeff Terry
-
Schima, Frank